前文我们了解了Ceph的访问接口的启用相关话题，回顾请参考https://www.cnblogs.com/qiuhom-1874/p/16727620.html；今天我们来聊一聊获取ceph集群状态和ceph配置文件说明相关话题；
Ceph集群状态获取常用命令
1、ceph -s ：该命令用于输出ceph集群系统状态信息
提示：ceph -s主要输出有三类信息，一类是集群相关信息，比如集群id，健康状态；第二类是服务类相关信息，比如集群运行了几个mon节点，几个mgr节点，几个mds，osd和rgw；这些服务都处于什么样的状态等等；我们把这些信息称为集群运行状况，它可以让我们一目了然的了解到集群现有运行状况；第三类信息是数据存储类的信息；比如有多少个存储池，和pg数量；usage用来展示集群使用容量和剩余容量以及总容量；这里需要注意一点，集群显示的总磁盘大小，它不等于可以存储这么多对象数据；因为每一个对象数据都多个副本，所以真正能够存储对象数据的量应该根据副本的数量来计算；默认情况下，我们创建的存储都是副本型存储池，副本数量是3个（其中一个主，两个从），即每一个对象数据都会存储三份，所以真正能够存储对象数据的空间只有总空间的三分之一；
获取集群的即时状态信息
2、获取pg的状态
1 2 3 | [cephadm@ceph-admin ceph-cluster]$ ceph pg stat304 pgs: 304 active+clean; 3.8 KiB data, 10 GiB used, 890 GiB / 900 GiB avail[cephadm@ceph-admin ceph-cluster]$ |
3、获取存储池的状态
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 | [cephadm@ceph-admin ceph-cluster]$ ceph osd pool stats pool testpool id 1 nothing is going onpool rbdpool id 2 nothing is going onpool .rgw.root id 3 nothing is going onpool default.rgw.control id 4 nothing is going onpool default.rgw.meta id 5 nothing is going onpool default.rgw.log id 6 nothing is going onpool cephfs-metadatpool id 7 nothing is going onpool cephfs-datapool id 8 nothing is going on[cephadm@ceph-admin ceph-cluster]$ |
提示：如果后面没有跟指定的存储表示获取所有存储的状态；
4、获取存储池大小和空间使用情况
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 | [cephadm@ceph-admin ceph-cluster]$ ceph dfGLOBAL: SIZE AVAIL RAW USED %RAW USED 900 GiB 890 GiB 10 GiB 1.13 POOLS: NAME ID USED %USED MAX AVAIL OBJECTS testpool 1 0 B 0 281 GiB 0 rbdpool 2 389 B 0 281 GiB 5 .rgw.root 3 1.1 KiB 0 281 GiB 4 default.rgw.control 4 0 B 0 281 GiB 8 default.rgw.meta 5 0 B 0 281 GiB 0 default.rgw.log 6 0 B 0 281 GiB 175 cephfs-metadatpool 7 2.2 KiB 0 281 GiB 22 cephfs-datapool 8 0 B 0 281 GiB 0 [cephadm@ceph-admin ceph-cluster]$ |
提示：ceph df输出的内容主要分两大段，第一段是global，全局存储空间用量情况；size表示总空间大小，avail表示剩余空间大小；RAW USED表示已用到原始存储空间；%RAW USED表示已用原始空间占比重空间的比例；第二段是相关存储空间使用情况；其中MAX AVAIL表示对应存储池能够使用的最大容量；OBJECTS表示该存储池中对象的个数；
获取存储空间用量详细情况
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 | [cephadm@ceph-admin ceph-cluster]$ ceph df detailGLOBAL: SIZE AVAIL RAW USED %RAW USED OBJECTS 900 GiB 890 GiB 10 GiB 1.13 214 POOLS: NAME ID QUOTA OBJECTS QUOTA BYTES USED %USED MAX AVAIL OBJECTS DIRTY READ WRITE RAW USED testpool 1 N/A N/A 0 B 0 281 GiB 0 0 2 B 2 B 0 B rbdpool 2 N/A N/A 389 B 0 281 GiB 5 5 75 B 19 B 1.1 KiB .rgw.root 3 N/A N/A 1.1 KiB 0 281 GiB 4 4 66 B 4 B 3.4 KiB default.rgw.control 4 N/A N/A 0 B 0 281 GiB 8 8 0 B 0 B 0 B default.rgw.meta 5 N/A N/A 0 B 0 281 GiB 0 0 0 B 0 B 0 B default.rgw.log 6 N/A N/A 0 B 0 281 GiB 175 175 7.2 KiB 4.8 KiB 0 B cephfs-metadatpool 7 N/A N/A 2.2 KiB 0 281 GiB 22 22 0 B 45 B 6.7 KiB cephfs-datapool 8 N/A N/A 0 B 0 281 GiB 0 0 0 B 0 B 0 B [cephadm@ceph-admin ceph-cluster]$ |
5、检查OSD和MON的状态
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 | [cephadm@ceph-admin ceph-cluster]$ ceph osd stat10 osds: 10 up, 10 in; epoch: e99[cephadm@ceph-admin ceph-cluster]$ ceph osd dumpepoch 99fsid 7fd4a619-9767-4b46-9cee-78b9dfe88f34created 2022-09-24 00:36:13.639715modified 2022-09-25 12:33:15.111283flags sortbitwise,recovery_deletes,purged_snapdirscrush_version 25full_ratio 0.95backfillfull_ratio 0.9nearfull_ratio 0.85require_min_compat_client jewelmin_compat_client jewelrequire_osd_release mimicpool 1 'testpool' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 16 pgp_num 16 last_change 42 flags hashpspool stripe_width 0pool 2 'rbdpool' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 64 pgp_num 64 last_change 81 flags hashpspool,selfmanaged_snaps stripe_width 0 application rbd removed_snaps [1~3]pool 3 '.rgw.root' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 8 pgp_num 8 last_change 84 owner 18446744073709551615 flags hashpspool stripe_width 0 application rgwpool 4 'default.rgw.control' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 8 pgp_num 8 last_change 87 owner 18446744073709551615 flags hashpspool stripe_width 0 application rgwpool 5 'default.rgw.meta' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 8 pgp_num 8 last_change 89 owner 18446744073709551615 flags hashpspool stripe_width 0 application rgwpool 6 'default.rgw.log' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 8 pgp_num 8 last_change 91 owner 18446744073709551615 flags hashpspool stripe_width 0 application rgwpool 7 'cephfs-metadatpool' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 64 pgp_num 64 last_change 99 flags hashpspool stripe_width 0 application cephfspool 8 'cephfs-datapool' replicated size 3 min_size 2 crush_rule 0 object_hash rjenkins pg_num 128 pgp_num 128 last_change 99 flags hashpspool stripe_width 0 application cephfsmax_osd 10osd.0 up in weight 1 up_from 67 up_thru 96 down_at 66 last_clean_interval [64,65) 192.168.0.71:6802/1361 172.16.30.71:6802/1361 172.16.30.71:6803/1361 192.168.0.71:6803/1361 exists,up bf3649af-e3f4-41a2-a5ce-8f1a316d344eosd.1 up in weight 1 up_from 68 up_thru 96 down_at 66 last_clean_interval [64,65) 192.168.0.71:6800/1346 172.16.30.71:6800/1346 172.16.30.71:6801/1346 192.168.0.71:6801/1346 exists,up 7293a12a-7b4e-4c86-82dc-0acc15c3349eosd.2 up in weight 1 up_from 67 up_thru 96 down_at 66 last_clean_interval [60,65) 192.168.0.72:6800/1389 172.16.30.72:6800/1389 172.16.30.72:6801/1389 192.168.0.72:6801/1389 exists,up 96c437c5-8e82-4486-910f-9e98d195e4f9osd.3 up in weight 1 up_from 67 up_thru 96 down_at 66 last_clean_interval [60,65) 192.168.0.72:6802/1406 172.16.30.72:6802/1406 172.16.30.72:6803/1406 192.168.0.72:6803/1406 exists,up 4659d2a9-09c7-49d5-bce0-4d2e65f5198cosd.4 up in weight 1 up_from 71 up_thru 96 down_at 68 last_clean_interval [59,66) 192.168.0.73:6802/1332 172.16.30.73:6802/1332 172.16.30.73:6803/1332 192.168.0.73:6803/1332 exists,up de019aa8-3d2a-4079-a99e-ec2da2d4edb9osd.5 up in weight 1 up_from 71 up_thru 96 down_at 68 last_clean_interval [58,66) 192.168.0.73:6800/1333 172.16.30.73:6800/1333 172.16.30.73:6801/1333 192.168.0.73:6801/1333 exists,up 119c8748-af3b-4ac4-ac74-6171c90c82ccosd.6 up in weight 1 up_from 69 up_thru 96 down_at 68 last_clean_interval [59,66) 192.168.0.74:6800/1306 172.16.30.74:6800/1306 172.16.30.74:6801/1306 192.168.0.74:6801/1306 exists,up 08d8dd8b-cdfe-4338-83c0-b1e2b5c2a799osd.7 up in weight 1 up_from 69 up_thru 96 down_at 68 last_clean_interval [60,65) 192.168.0.74:6802/1301 172.16.30.74:6802/1301 172.16.30.74:6803/1301 192.168.0.74:6803/1301 exists,up 9de6cbd0-bb1b-49e9-835c-3e714a867393osd.8 up in weight 1 up_from 73 up_thru 96 down_at 66 last_clean_interval [59,65) 192.168.0.75:6800/1565 172.16.30.75:6800/1565 172.16.30.75:6801/1565 192.168.0.75:6801/1565 exists,up 63aaa0b8-4e52-4d74-82a8-fbbe7b48c837osd.9 up in weight 1 up_from 73 up_thru 96 down_at 66 last_clean_interval [59,65) 192.168.0.75:6802/1558 172.16.30.75:6802/1558 172.16.30.75:6803/1558 192.168.0.75:6803/1558 exists,up 6bf3204a-b64c-4808-a782-434a93ac578c[cephadm@ceph-admin ceph-cluster]$ |
除了上述命令来检查osd状态，我们还可以根据OSD在CRUSH MPA中的位置查看osd
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 | [cephadm@ceph-admin ceph-cluster]$ ceph osd treeID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF -1 0.87891 root default -9 0.17578 host ceph-mgr01 6 hdd 0.07809 osd.6 up 1.00000 1.00000 7 hdd 0.09769 osd.7 up 1.00000 1.00000 -3 0.17578 host ceph-mon01 0 hdd 0.07809 osd.0 up 1.00000 1.00000 1 hdd 0.09769 osd.1 up 1.00000 1.00000 -5 0.17578 host ceph-mon02 2 hdd 0.07809 osd.2 up 1.00000 1.00000 3 hdd 0.09769 osd.3 up 1.00000 1.00000 -7 0.17578 host ceph-mon03 4 hdd 0.07809 osd.4 up 1.00000 1.00000 5 hdd 0.09769 osd.5 up 1.00000 1.00000 -11 0.17578 host node01 8 hdd 0.07809 osd.8 up 1.00000 1.00000 9 hdd 0.09769 osd.9 up 1.00000 1.00000 [cephadm@ceph-admin ceph-cluster]$ |
提示：从上面的输出信息我们可以看到每台主机上osd编号情况，以及每个OSD的权重；
检查mon节点状态
1 2 3 4 5 6 7 8 9 10 11 12 | [cephadm@ceph-admin ceph-cluster]$ ceph mon state3: 3 mons at {ceph-mon01=192.168.0.71:6789/0,ceph-mon02=192.168.0.72:6789/0,ceph-mon03=192.168.0.73:6789/0}, election epoch 18, leader 0 ceph-mon01, quorum 0,1,2 ceph-mon01,ceph-mon02,ceph-mon03[cephadm@ceph-admin ceph-cluster]$ ceph mon dumpdumped monmap epoch 3epoch 3fsid 7fd4a619-9767-4b46-9cee-78b9dfe88f34last_changed 2022-09-24 01:56:24.196075created 2022-09-24 00:36:13.2101550: 192.168.0.71:6789/0 mon.ceph-mon011: 192.168.0.72:6789/0 mon.ceph-mon022: 192.168.0.73:6789/0 mon.ceph-mon03[cephadm@ceph-admin ceph-cluster]$ |
提示：上述两条命令都能显示出集群有多少个mon节点，以及对应节点的ip地址和监听端口，以及mon节点编号等信息；ceph mon stat除了能显示有多少mon节点和mon的详细信息外，它还显示领导节点的编号，以及选举次数；
查看仲裁状态
1 2 3 | [cephadm@ceph-admin ceph-cluster]$ ceph quorum_status{"election_epoch":18,"quorum":[0,1,2],"quorum_names":["ceph-mon01","ceph-mon02","ceph-mon03"],"quorum_leader_name":"ceph-mon01","monmap":{"epoch":3,"fsid":"7fd4a619-9767-4b46-9cee-78b9dfe88f34","modified":"2022-09-24 01:56:24.196075","created":"2022-09-24 00:36:13.210155","features":{"persistent":["kraken","luminous","mimic","osdmap-prune"],"optional":[]},"mons":[{"rank":0,"name":"ceph-mon01","addr":"192.168.0.71:6789/0","public_addr":"192.168.0.71:6789/0"},{"rank":1,"name":"ceph-mon02","addr":"192.168.0.72:6789/0","public_addr":"192.168.0.72:6789/0"},{"rank":2,"name":"ceph-mon03","addr":"192.168.0.73:6789/0","public_addr":"192.168.0.73:6789/0"}]}}[cephadm@ceph-admin ceph-cluster]$ |
使用管理套接字查询集群状态
Ceph的管理套接字接口常用于查询守护进程，套接字默认保存 于/var/run/ceph目录，此接口的使用不能以远程方式进程，只能在对应节点上使用；
命令的使用格式：ceph --admin-daemon /var/run/ceph/socket-name 命令；比如获取帮助信息 ceph --admin-daemon /var/run/ceph/socket-name help
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 | [root@ceph-mon01 ~]# ceph --admin-daemon /var/run/ceph/ceph-osd.0.asok help{ "calc_objectstore_db_histogram": "Generate key value histogram of kvdb(rocksdb) which used by bluestore", "compact": "Commpact object store's omap. WARNING: Compaction probably slows your requests", "config diff": "dump diff of current config and default config", "config diff get": "dump diff get , "config get": "config get , "config help": "get config setting schema and descriptions", "config set": "config set , "config show": "dump current config settings", "config unset": "config unset , "dump_blacklist": "dump blacklisted clients and times", "dump_blocked_ops": "show the blocked ops currently in flight", "dump_historic_ops": "show recent ops", "dump_historic_ops_by_duration": "show slowest recent ops, sorted by duration", "dump_historic_slow_ops": "show slowest recent ops", "dump_mempools": "get mempool stats", "dump_objectstore_kv_stats": "print statistics of kvdb which used by bluestore", "dump_op_pq_state": "dump op priority queue state", "dump_ops_in_flight": "show the ops currently in flight", "dump_osd_network": "Dump osd heartbeat network ping times", "dump_pgstate_history": "show recent state history", "dump_reservations": "show recovery reservations", "dump_scrubs": "print scheduled scrubs", "dump_watchers": "show clients which have active watches, and on which objects", "flush_journal": "flush the journal to permanent store", "flush_store_cache": "Flush bluestore internal cache", "get_command_descriptions": "list available commands", "get_heap_property": "get malloc extension heap property", "get_latest_osdmap": "force osd to update the latest map from the mon", "get_mapped_pools": "dump pools whose PG(s) are mapped to this OSD.", "getomap": "output entire object map", "git_version": "get git sha1", "heap": "show heap usage info (available only if compiled with tcmalloc)", "help": "list available commands", "injectdataerr": "inject data error to an object", "injectfull": "Inject a full disk (optional count times)", "injectmdataerr": "inject metadata error to an object", "list_devices": "list OSD devices.", "log dump": "dump recent log entries to log file", "log flush": "flush log entries to log file", "log reopen": "reopen log file", "objecter_requests": "show in-progress osd requests", "ops": "show the ops currently in flight", "perf dump": "dump perfcounters value", "perf histogram dump": "dump perf histogram values", "perf histogram schema": "dump perf histogram schema", "perf reset": "perf reset , "perf schema": "dump perfcounters schema", "rmomapkey": "remove omap key", "set_heap_property": "update malloc extension heap property", "set_recovery_delay": "Delay osd recovery by specified seconds", "setomapheader": "set omap header", "setomapval": "set omap key", "smart": "probe OSD devices for SMART data.", "status": "high-level status of OSD", "trigger_deep_scrub": "Trigger a scheduled deep scrub ", "trigger_scrub": "Trigger a scheduled scrub ", "truncobj": "truncate object to length", "version": "get ceph version"}[root@ceph-mon01 ~]# |
比如获取mon01的版本信息
1 2 3 | [root@ceph-mon01 ~]# ceph --admin-daemon /var/run/ceph/ceph-mon.ceph-mon01.asok version{"version":"13.2.10","release":"mimic","release_type":"stable"}[root@ceph-mon01 ~]# |
获取osd的状态信息
1 2 3 4 5 6 7 8 9 10 11 | [root@ceph-mon01 ~]# ceph --admin-daemon /var/run/ceph/ceph-osd.0.asok status { "cluster_fsid": "7fd4a619-9767-4b46-9cee-78b9dfe88f34", "osd_fsid": "bf3649af-e3f4-41a2-a5ce-8f1a316d344e", "whoami": 0, "state": "active", "oldest_map": 1, "newest_map": 114, "num_pgs": 83}[root@ceph-mon01 ~]# |
进程的运行时配置
我们可以使用ceph daemon命令来动态的配置ceph进程，即不停服务动态配置进程；
比如，获取osd.0的公网地址
1 2 3 4 5 | [root@ceph-mon01 ~]# ceph daemon osd.0 config get public_addr{ "public_addr": "192.168.0.71:0/0"}[root@ceph-mon01 ~]# |
获取帮助信息：命令格式：ceph daemon {daemon-type}.{id} help
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 | [root@ceph-mon01 ~]# ceph daemon osd.1 help{ "calc_objectstore_db_histogram": "Generate key value histogram of kvdb(rocksdb) which used by bluestore", "compact": "Commpact object store's omap. WARNING: Compaction probably slows your requests", "config diff": "dump diff of current config and default config", "config diff get": "dump diff get , "config get": "config get , "config help": "get config setting schema and descriptions", "config set": "config set , "config show": "dump current config settings", "config unset": "config unset , "dump_blacklist": "dump blacklisted clients and times", "dump_blocked_ops": "show the blocked ops currently in flight", "dump_historic_ops": "show recent ops", "dump_historic_ops_by_duration": "show slowest recent ops, sorted by duration", "dump_historic_slow_ops": "show slowest recent ops", "dump_mempools": "get mempool stats", "dump_objectstore_kv_stats": "print statistics of kvdb which used by bluestore", "dump_op_pq_state": "dump op priority queue state", "dump_ops_in_flight": "show the ops currently in flight", "dump_osd_network": "Dump osd heartbeat network ping times", "dump_pgstate_history": "show recent state history", "dump_reservations": "show recovery reservations", "dump_scrubs": "print scheduled scrubs", "dump_watchers": "show clients which have active watches, and on which objects", "flush_journal": "flush the journal to permanent store", "flush_store_cache": "Flush bluestore internal cache", "get_command_descriptions": "list available commands", "get_heap_property": "get malloc extension heap property", "get_latest_osdmap": "force osd to update the latest map from the mon", "get_mapped_pools": "dump pools whose PG(s) are mapped to this OSD.", "getomap": "output entire object map", "git_version": "get git sha1", "heap": "show heap usage info (available only if compiled with tcmalloc)", "help": "list available commands", "injectdataerr": "inject data error to an object", "injectfull": "Inject a full disk (optional count times)", "injectmdataerr": "inject metadata error to an object", "list_devices": "list OSD devices.", "log dump": "dump recent log entries to log file", "log flush": "flush log entries to log file", "log reopen": "reopen log file", "objecter_requests": "show in-progress osd requests", "ops": "show the ops currently in flight", "perf dump": "dump perfcounters value", "perf histogram dump": "dump perf histogram values", "perf histogram schema": "dump perf histogram schema", "perf reset": "perf reset , "perf schema": "dump perfcounters schema", "rmomapkey": "remove omap key", "set_heap_property": "update malloc extension heap property", "set_recovery_delay": "Delay osd recovery by specified seconds", "setomapheader": "set omap header", "setomapval": "set omap key", "smart": "probe OSD devices for SMART data.", "status": "high-level status of OSD", "trigger_deep_scrub": "Trigger a scheduled deep scrub ", "trigger_scrub": "Trigger a scheduled scrub ", "truncobj": "truncate object to length", "version": "get ceph version"}[root@ceph-mon01 ~]# |
提示：ceph daemon获取某个进程的信息时，需要在对应主机上用root执行命令；
动态设置进程参数有两种方式，一种是通过mon向对应进程发送配置，一种是通过admin socket发送配置给进程
通过mon向对应进程发送配置命令格式： ceph tell {daemon-type}.{daemon id or *} injectargs --{name} {value} [--{name} {value}]
1 2 | [cephadm@ceph-admin ceph-cluster]$ ceph tell osd.1 injectargs '--debug-osd 0/5'[cephadm@ceph-admin ceph-cluster]$ |
提示：这种方式可以在集群任意主机上执行；
通过admin socket的方式发送配置命令格式：ceph daemon {daemon-type}.{id} set {name} {value}
1 2 3 4 5 | [root@ceph-mon01 ~]# ceph daemon osd.0 config set debug_osd 0/5{ "success": ""}[root@ceph-mon01 ~]# |
提示：这种方式只能在进程所在主机上执行；
停止或重启Ceph集群步骤
停止ceph集群步骤
1、告知Ceph集群不要将OSD标记为out，命令：ceph osd set noout
1 2 3 | [cephadm@ceph-admin ceph-cluster]$ ceph osd set nooutnoout is set[cephadm@ceph-admin ceph-cluster]$ |
2、按如下顺序停止守护进程和节点：停止存储客户端--->网关，如rgw--->元数据服务器，MDS---> Ceph OSD---> Ceph Manager--->Ceph Monitor；然后关闭对应主机；
启动ceph集群步骤
1、以与停止过程相关的顺序启动节点：Ceph Monitor--->Ceph Manager--->Ceph OSD--->元数据服务器，MDS--->网关，如rgw---->存储客户端；
2、删除noout标志，命令ceph osd unset noout
1 2 3 | [cephadm@ceph-admin ceph-cluster]$ ceph osd unset nooutnoout is unset[cephadm@ceph-admin ceph-cluster]$ |
提示：集群重新启动起来，需要将noout标记取消，以免但真正有osd故障时，能够将osd及时下线，避免将对应存取数据的操作调度到对应osd上进行操作而引发的故障；
ceph是一个对象存储集群，在生产环境中，如有不慎可能导致不可预估的后果，所以停止和启动顺序都非常重要；上述过程主要是尽量减少丢失数据的几率，但不保证一定不丢数据；
Ceph配置文件ceph.conf说明
1 2 3 4 5 6 7 8 9 10 11 12 | [cephadm@ceph-admin ceph-cluster]$ cat /etc/ceph/ceph.conf [global]fsid = 7fd4a619-9767-4b46-9cee-78b9dfe88f34mon_initial_members = ceph-mon01mon_host = 192.168.0.71public_network = 192.168.0.0/24cluster_network = 172.16.30.0/24auth_cluster_required = cephxauth_service_required = cephxauth_client_required = cephx[cephadm@ceph-admin ceph-cluster]$ |
提示：ceph.conf配置文件严格遵守ini配置文件风格的语法和格式；其中井号‘#’和冒号‘；’用于注释；ceph.conf主要有[global]、[osd]、[mon]、[client]这4个配置段组成；其中global配置段适用于全局配置，即各组件的公共配置；【osd】配置段作用范围是集群所有osd都生效的配置；【mon】作用范围是集群所以mon都生效的配置；【client】作用范围是所有客户端，比如rbd、rgw；
mon和osd的独有配置段
上面的【osd】和【mon】配置段都是针对所有osd和mon生效，如果我们只想配置单独某一个osd或mon该怎么配置呢？ceph.conf中我们使用[type.ID]来表示某一个osd或mon的配置；比如，我们只想配置osd.0，则我们可以在配置段里写[osd.0]来表示该段配置只针对osd.0生效；同样mon也是同样的逻辑，不同于osd的是，mon的ID不是数字；我们可以使用ceph mon dump来查看mon的ID；
获取osd的编号
提示：osd的编号都是数字，从0开始；
ceph.conf配置段生效优先级
如果以上公共配置段里的配置和专用配置段的配置重复，则专用配置段覆盖公共配置段里的配置，即专用配置段里的配置生效；配置生效优先级顺序为：【global】小于【osd】、【mon】、【client】；【osd】小于【osd.ID】，【mon】小于【mon.a】；总之配置段作用范围越小，越优先生效；
ceph配置文件生效优先级
ceph启动时会按如下顺序查找配置文件
1、$CEPH_CONF：该环境变量所指定的配置文件；
2、-c path/path ：命令行使用-c选项指定的配置文件路径；
3、/etc/ceph/ceph.conf：默认配置文件路径
4、～/.ceph/config：当前用户家目录下.ceph/config文件
5、./ceph.conf ：当前用户所在目录下的ceph.conf文件
配置文件生效顺序是$CEPH_CONF---->-c path/path ---->/etc/ceph/ceph.conf---->～/.ceph/config---->./ceph.conf ；
Ceph配置文件常用的元参数
ceph配置文件支持用元参数来替换对应配置信息，比如$cluster就表示当前Ceph集群的名称；$type表示当前服务的类型名称；比如osd、mon；$id表示守护进程的标识符，比如以osd.0来说，它的标识符就是0；$host表示守护进程所在主机的主机名；$name表示当前服务的类型名称和进程标识符的组合；即$name=$type.$id；