一、复制标准项目模板实现项目立项
因为CJ20N录屏存在困难，所以想通过BDC实现复制项目模板创建项目立项行不通，因此需要通过BAPI解决。
因为项目立项包含：项目定义、WBS、网络、作业，因此需要分别调用四个BAPI实现该功能
二、CJ01 项目定义与WBS
输入项目定义编号和参数文件
传入必输字段，点击WBS元素总览
输入WBS层级，点击保存即可
创建项目BAPI
"-----------------------------@斌将军----------------------------- DATA:gs_proj_bus2001_new TYPE bapi_bus2001_new, gt_bapiret2 TYPE TABLE OF bapiret2, gs_bapiret2 TYPE bapiret2. gs_proj_bus2001_new-project_definition = 'NPD-2022037'."is_proj-pspid. "项目编号 gs_proj_bus2001_new-description = '测试'."is_proj-post1. "PS: 短描述 (第一行文本) gs_proj_bus2001_new-responsible_no = '80000667'."lv_vernr. "项目经理编号 gs_proj_bus2001_new-applicant_no = '81000003'."lv_vernr. "申请部门编号 gs_proj_bus2001_new-start = '20220225'."is_proj-plfaz. "开始日期 gs_proj_bus2001_new-finish = '20220428'."is_proj-plsez. "完成日期 gs_proj_bus2001_new-company_code = '2000'."is_proj-vbukr. "项目的公司代码 gs_proj_bus2001_new-profit_ctr = ''."is_proj-prctr. "利润中心 gs_proj_bus2001_new-project_profile = 'APS0001'."is_proj-profl. "项目参数文件 gs_proj_bus2001_new-plant = '2000'."is_proj-werks. "工厂 *IF is_proj-func_area IS NOT INITIAL. * gs_proj_bus2001_new-func_area = is_proj-func_area. "功能控制范围 *ENDIF. CALL FUNCTION 'BAPI_PS_INITIALIZATION'. CALL FUNCTION 'BAPI_BUS2001_CREATE' EXPORTING i_project_definition = gs_proj_bus2001_new TABLES et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ENDIF. CHECK sy-subrc NE 0. CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK' IMPORTING return = gs_bapiret2. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X' IMPORTING return = gs_bapiret2. * 项目定义创建成功 ENDIF. "-----------------------------@斌将军-----------------------------
创建WBS的BAPI
"-----------------------------@斌将军----------------------------- DATA:lv_pspid TYPE bapi_bus2001_new-project_definition, gt_wbs_bus2054_new TYPE TABLE OF bapi_bus2054_new, gs_wbs_bus2054_new TYPE bapi_bus2054_new, gt_bapiret2 TYPE TABLE OF bapiret2, gs_bapiret2 TYPE bapiret2. CLEAR:gs_wbs_bus2054_new. gs_wbs_bus2054_new-wbs_element = 'NPD-2022038'."gs_wbs-posid. "工作分解结构元素 (WBS 元素) gs_wbs_bus2054_new-description = '第一层'."gs_wbs-post1. "PS: 短描述 (第一行文本) gs_wbs_bus2054_new-responsible_no = '80000667'."lv_vernr. "项目经理编号 *gs_wbs_bus2054_new-profit_ctr = ''."gs_wbs-prctr. "利润中心 gs_wbs_bus2054_new-proj_type = '11'."gs_wbs-prart. "项目类型 gs_wbs_bus2054_new-wbs_account_assignment_element = 'X'."gs_wbs-belkz. "标志：科目分配元素 *gs_wbs_bus2054_new-wbs_billing_element = ''."gs_wbs-fakkz. "标识符： 开票元素 gs_wbs_bus2054_new-wbs_left = ''."gs_wbs-left_posid."左侧WBS gs_wbs_bus2054_new-wbs_up = ''."gs_wbs-up_posid. "上级WBS *gs_wbs_bus2054_new-user_field_char20_1 = ''."gs_wbs-usr00. "业务类别 *gs_wbs_bus2054_new-user_field_char20_2 = ''."gs_wbs-usr01. "CRM 商机编码 *gs_wbs_bus2054_new-user_field_char10_1 = ''."'X'. "产品 *gs_wbs_bus2054_new-statistical = ''."gs_wbs-xstat. "统计 *gs_wbs_bus2054_new-wbs_cctr_posted_actual = ''."gs_wbs-kostl. "CCtr 过账 APPEND gs_wbs_bus2054_new TO gt_wbs_bus2054_new. CLEAR:gs_wbs_bus2054_new. gs_wbs_bus2054_new-wbs_element = 'NPD-2022038.001'."gs_wbs-posid. "工作分解结构元素 (WBS 元素) gs_wbs_bus2054_new-description = '第二层'."gs_wbs-post1. "PS: 短描述 (第一行文本) gs_wbs_bus2054_new-responsible_no = '80000667'."lv_vernr. "项目经理编号 *gs_wbs_bus2054_new-profit_ctr = ''."gs_wbs-prctr. "利润中心 gs_wbs_bus2054_new-proj_type = '11'."gs_wbs-prart. "项目类型 gs_wbs_bus2054_new-wbs_account_assignment_element = 'X'."gs_wbs-belkz. "标志：科目分配元素 *gs_wbs_bus2054_new-wbs_billing_element = ''."gs_wbs-fakkz. "标识符： 开票元素 gs_wbs_bus2054_new-wbs_left = ''."gs_wbs-left_posid."左侧WBS gs_wbs_bus2054_new-wbs_up = 'NPD-2022038'."gs_wbs-up_posid. "上级WBS *gs_wbs_bus2054_new-user_field_char20_1 = ''."gs_wbs-usr00. "业务类别 *gs_wbs_bus2054_new-user_field_char20_2 = ''."gs_wbs-usr01. "CRM 商机编码 *gs_wbs_bus2054_new-user_field_char10_1 = ''."'X'. "产品 *gs_wbs_bus2054_new-statistical = ''."gs_wbs-xstat. "统计 *gs_wbs_bus2054_new-wbs_cctr_posted_actual = ''."gs_wbs-kostl. "CCtr 过账 APPEND gs_wbs_bus2054_new TO gt_wbs_bus2054_new. CLEAR:gs_wbs_bus2054_new. gs_wbs_bus2054_new-wbs_element = 'NPD-2022038.002'."gs_wbs-posid. "工作分解结构元素 (WBS 元素) gs_wbs_bus2054_new-description = '第三层'."gs_wbs-post1. "PS: 短描述 (第一行文本) gs_wbs_bus2054_new-responsible_no = '80000667'."lv_vernr. "项目经理编号 *gs_wbs_bus2054_new-profit_ctr = ''."gs_wbs-prctr. "利润中心 gs_wbs_bus2054_new-proj_type = '11'."gs_wbs-prart. "项目类型 gs_wbs_bus2054_new-wbs_account_assignment_element = 'X'."gs_wbs-belkz. "标志：科目分配元素 *gs_wbs_bus2054_new-wbs_billing_element = ''."gs_wbs-fakkz. "标识符： 开票元素 *gs_wbs_bus2054_new-wbs_left = 'NPD-2022037.001'."gs_wbs-left_posid."左侧WBS gs_wbs_bus2054_new-wbs_up = 'NPD-2022038'."gs_wbs-up_posid. "上级WBS *gs_wbs_bus2054_new-user_field_char20_1 = ''."gs_wbs-usr00. "业务类别 *gs_wbs_bus2054_new-user_field_char20_2 = ''."gs_wbs-usr01. "CRM 商机编码 *gs_wbs_bus2054_new-user_field_char10_1 = ''."'X'. "产品 *gs_wbs_bus2054_new-statistical = ''."gs_wbs-xstat. "统计 *gs_wbs_bus2054_new-wbs_cctr_posted_actual = ''."gs_wbs-kostl. "CCtr 过账 APPEND gs_wbs_bus2054_new TO gt_wbs_bus2054_new. lv_pspid = 'NPD-2022038'. CALL FUNCTION 'BAPI_PS_INITIALIZATION'. CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI' EXPORTING i_project_definition = lv_pspid TABLES it_wbs_element = gt_wbs_bus2054_new et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AE'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ENDIF. CHECK sy-subrc NE 0. CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AE'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK' IMPORTING return = gs_bapiret2. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X' IMPORTING return = gs_bapiret2. ENDIF. "-----------------------------@斌将军-----------------------------
三、CN21创建网络和作业
分配给WBS，点击作业
创建作业，分配给WBS，点击保存即可
创建网络BAPI
"-----------------------------@斌将军----------------------------- DATA:gs_net_bus2002_new TYPE bapi_bus2002_new, gt_bapiret2 TYPE TABLE OF bapiret2, gs_bapiret2 TYPE bapiret2. CLEAR : gs_net_bus2002_new. gs_net_bus2002_new-project_definition = 'NPD-2022037'."is_network-pspid. "项目定义 gs_net_bus2002_new-wbs_element = 'NPD-2022037'."is_network-posid. "工作分解结构元素 (WBS 元素) gs_net_bus2002_new-short_text = '网络测试'."is_network-ktext. "描述 * gs_net_bus2002_new-plant = ''."is_network-werks. "工厂 * gs_net_bus2002_new-mrp_controller = ''."is_network-dispo. "MRP控制者 CALL FUNCTION 'BAPI_PS_INITIALIZATION'. CALL FUNCTION 'BAPI_BUS2002_CREATE' EXPORTING i_network = gs_net_bus2002_new TABLES et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ENDIF. CHECK sy-subrc NE 0. CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK' IMPORTING return = gs_bapiret2. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X' IMPORTING return = gs_bapiret2. READ TABLE gt_bapiret2 INTO gs_bapiret2 WITH KEY id = 'CNIF_PI' number = '003'. IF sy-subrc EQ 0. * ev_aufnr = gs_bapiret2-message_v2. ENDIF. ENDIF. "-----------------------------@斌将军-----------------------------
创建作业BAPI
"-----------------------------@斌将军----------------------------- DATA:lv_aufnr TYPE bapi_network_list-network. DATA:gt_act_bus2002_new TYPE TABLE OF bapi_bus2002_act_new, gs_act_bus2002_new TYPE bapi_bus2002_act_new, gt_bapiret2 TYPE TABLE OF bapiret2, gs_bapiret2 TYPE bapiret2. CLEAR:gs_act_bus2002_new. gs_act_bus2002_new-activity = '0010'."gs_activity-vornr. "在网络和库网络中的作业编号 gs_act_bus2002_new-description = '封装测试'."gs_activity-ltxa1. "工序短文本 gs_act_bus2002_new-control_key = ''."gs_activity-steus. "控制码-内协(ZPS1)和成本（ZPS3） gs_act_bus2002_new-wbs_element = 'NPD-2022037.001'."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-duration_normal = 2."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-work_cntr = ''."gs_activity-arbpl. "工作中心 gs_act_bus2002_new-work_activity = ''."gs_activity-arbei. "工作（时间单位H） *-------------MOD ON 20200423--------Begin----------------------------------- ** gs_act_bus2002_new-calculation_key = gs_activity-indet. "用于计算的码 *IF gs_activity-steus = 'ZPS1' AND gs_activity-arbei IS INITIAL. * gs_act_bus2002_new-calculation_key = 0. "用于计算的码 *ELSE. * gs_act_bus2002_new-calculation_key = gs_activity-indet. "用于计算的码 *ENDIF. *-------------MOD ON 20200423--------End------------------------------------- *gs_act_bus2002_new-acttype = gs_activity-larnt. "活动类型 *gs_act_bus2002_new-cost_elem = gs_activity-sakto. "成本要素编码 *gs_act_bus2002_new-profit_ctr = gs_activity-prctr. "利润中心 *IF gs_activity-steus EQ 'ZPS3'. * gs_act_bus2002_new-activity_costs = gs_activity-prkst. "作业中的成本 ** ELSE. ** gs_act_bus2002_new-user_field_curr1 = gs_activity-prkst. "用户字段 - 值3 *ENDIF. APPEND gs_act_bus2002_new TO gt_act_bus2002_new. CLEAR:gs_act_bus2002_new. gs_act_bus2002_new-activity = '0020'."gs_activity-vornr. "在网络和库网络中的作业编号 gs_act_bus2002_new-description = '项目产品设计'."gs_activity-ltxa1. "工序短文本 gs_act_bus2002_new-control_key = ''."gs_activity-steus. "控制码-内协(ZPS1)和成本（ZPS3） gs_act_bus2002_new-wbs_element = 'NPD-2022037.001'."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-duration_normal = 2."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-work_cntr = ''."gs_activity-arbpl. "工作中心 gs_act_bus2002_new-work_activity = ''."gs_activity-arbei. "工作（时间单位H） APPEND gs_act_bus2002_new TO gt_act_bus2002_new. CLEAR:gs_act_bus2002_new. gs_act_bus2002_new-activity = '0030'."gs_activity-vornr. "在网络和库网络中的作业编号 gs_act_bus2002_new-description = '项目立项'."gs_activity-ltxa1. "工序短文本 gs_act_bus2002_new-control_key = ''."gs_activity-steus. "控制码-内协(ZPS1)和成本（ZPS3） gs_act_bus2002_new-wbs_element = 'NPD-2022037.002'."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-duration_normal = 2."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-work_cntr = ''."gs_activity-arbpl. "工作中心 gs_act_bus2002_new-work_activity = ''."gs_activity-arbei. "工作（时间单位H） APPEND gs_act_bus2002_new TO gt_act_bus2002_new. CLEAR:gs_act_bus2002_new. gs_act_bus2002_new-activity = '0040'."gs_activity-vornr. "在网络和库网络中的作业编号 gs_act_bus2002_new-description = '项目评估'."gs_activity-ltxa1. "工序短文本 gs_act_bus2002_new-control_key = ''."gs_activity-steus. "控制码-内协(ZPS1)和成本（ZPS3） gs_act_bus2002_new-wbs_element = 'NPD-2022037.002'."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-duration_normal = 2."gs_activity-posid. "工作分解结构元素 (WBS 元素) gs_act_bus2002_new-work_cntr = ''."gs_activity-arbpl. "工作中心 gs_act_bus2002_new-work_activity = ''."gs_activity-arbei. "工作（时间单位H） APPEND gs_act_bus2002_new TO gt_act_bus2002_new. CALL FUNCTION 'BAPI_PS_INITIALIZATION'. lv_aufnr = '4000088'. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = lv_aufnr IMPORTING output = lv_aufnr. CALL FUNCTION 'BAPI_BUS2002_ACT_CREATE_MULTI' EXPORTING i_number = lv_aufnr TABLES it_activity = gt_act_bus2002_new et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AE'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ENDIF. CHECK sy-subrc NE 0. CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = gt_bapiret2. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AE'. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK' IMPORTING return = gs_bapiret2. CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' IMPORTING return = gs_bapiret2. ENDIF. "-----------------------------@斌将军-----------------------------
四、代码整合
通过整合四个BAPI，实现复制标准模板完成项目立项过程
"-----------------------------@斌将军----------------------------- FUNCTION zps01_project_create. *"---------------------------------------------------------------------- *"*"本地接口： *" IMPORTING *" VALUE(I_INPUT) TYPE ZSPS_CJXM *" EXPORTING *" VALUE(E_RETURN) TYPE BAPIRETURN *"---------------------------------------------------------------------- DATA:gs_proj_bus2001_new TYPE bapi_bus2001_new, gt_wbs_bus2054_new TYPE TABLE OF bapi_bus2054_new, gs_wbs_bus2054_new TYPE bapi_bus2054_new, gs_net_bus2002_new TYPE bapi_bus2002_new, gt_act_bus2002_new TYPE TABLE OF bapi_bus2002_act_new, gs_act_bus2002_new TYPE bapi_bus2002_act_new, gt_bapiret2 TYPE TABLE OF bapiret2, gs_bapiret2 TYPE bapiret2. DATA:lv_new_pspid TYPE proj-pspid, lv_bz_pspid TYPE projs-pspid, lv_ctumode TYPE ctu_params-dismode, lv_update TYPE ctu_params-updmode, lv_aufnr TYPE bapi_network_list-network, lv_bzxm TYPE proj-pspid, lv_prart TYPE char10, lv_wtges TYPE char17, lv_bzwbs TYPE ps_posid, * lv_profl TYPE proj-profl, lv_number TYPE numc3, lv_check TYPE char1, ls_return TYPE bapireturn, lv_message TYPE char200, lv_msg TYPE char200. IF i_input-pspid IS INITIAL. e_return-type = 'E'. e_return-message = '标准项目编码为空'. RETURN. ENDIF. IF i_input-vbukr IS INITIAL. e_return-type = 'E'. e_return-message = '公司代码为空'. RETURN. ENDIF. "获取项目类型相关配置信息 SELECT SINGLE * FROM zpst_prart INTO @DATA(ls_prart) WHERE bukrs = @i_input-vbukr AND zprart = @i_input-prart. "获取项目经理与OA账号关联表数据 SELECT SINGLE vernr, verna FROM tcj04 INTO @DATA(ls_cj04) WHERE verna = @i_input-usr00. IF ls_cj04 IS INITIAL. e_return-type = 'E'. e_return-message = '项目经理' && i_input-usr01 && '不存在'. RETURN. ENDIF. CLEAR:lv_bz_pspid. lv_bz_pspid = i_input-pspid."标准模板项目定义编号 CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT' EXPORTING input = lv_bz_pspid IMPORTING output = lv_bz_pspid. "获取相同项目类型，最大的项目编号 CLEAR:lv_prart. lv_prart = i_input-prart && sy-datum+0(4) && '%'. CLEAR:lv_new_pspid. SELECT MAX( pspid ) FROM proj INTO lv_new_pspid WHERE pspid LIKE lv_prart. IF lv_new_pspid IS INITIAL. lv_number = 1. ELSE. lv_number = lv_new_pspid+7(3). lv_number = lv_number + 1. ENDIF. lv_new_pspid = i_input-prart && '-' && sy-datum+0(4) && lv_number."要创建的项目定义编号 * CLEAR:lv_profl. * lv_profl = ."项目参数文件 * CASE i_input-prart. * WHEN 'NPD' OR 'NPI' OR 'RDT' OR 'AUT' OR 'TRY'. * lv_profl = '0001'. * WHEN 'TEH' OR 'EXP' OR 'ITA'. * lv_profl = '0002'. * WHEN 'COS'. * lv_profl = '0003'. * WHEN 'FAC'. * lv_profl = '0004'. * WHEN OTHERS. * ENDCASE. * IF i_input-vbukr = '1000'. * lv_profl = 'LRC' && lv_profl. * ELSEIF i_input-vbukr = '2000'. * lv_profl = 'APS' && lv_profl."项目参数文件 * ENDIF. SELECT SINGLE * FROM projs INTO @DATA(ls_projs) WHERE pspid = @lv_bz_pspid. IF sy-subrc EQ 0. "--------------------------------创建项目-------------------------------------- CLEAR:gs_proj_bus2001_new. gs_proj_bus2001_new-project_definition = lv_new_pspid. "项目编号 gs_proj_bus2001_new-description = i_input-post1. "PS: 短描述 (第一行文本) gs_proj_bus2001_new-responsible_no = ls_cj04-vernr. "项目经理编号 gs_proj_bus2001_new-applicant_no = ls_projs-astnr."lv_vernr. "申请部门编号 gs_proj_bus2001_new-start = i_input-plfaz. "开始日期 gs_proj_bus2001_new-finish = i_input-plsez. "完成日期 * gs_proj_bus2001_new-company_code = '2000'."is_proj-vbukr. "项目的公司代码 gs_proj_bus2001_new-profit_ctr = ''."is_proj-prctr. "利润中心 gs_proj_bus2001_new-project_profile = ls_prart-profl."is_proj-profl. "项目参数文件 * gs_proj_bus2001_new-plant = '2000'."is_proj-werks. "工厂 "初始化 CALL FUNCTION 'BAPI_PS_INITIALIZATION'. "创建项目 REFRESH:gt_bapiret2. CALL FUNCTION 'BAPI_BUS2001_CREATE' EXPORTING i_project_definition = gs_proj_bus2001_new TABLES et_return = gt_bapiret2. CLEAR:lv_check,lv_message. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. lv_check = 'E'. lv_message = lv_message && gs_bapiret2-message. CLEAR:gs_bapiret2. ENDLOOP. IF lv_check = 'E'. "错误后初始化 CALL FUNCTION 'ZPS01_PS_FLAG'. e_return-type = 'E'. e_return-message = lv_message. RETURN. ELSE. CLEAR:ls_return. "成功时提交 CALL FUNCTION 'ZPS01_PS_PRECOMMIT' IMPORTING e_return = ls_return. IF ls_return-type = 'E'. e_return-type = 'E'. e_return-message = ls_return-message. RETURN. ENDIF. "--------------------------------创建WBS-------------------------------------- SELECT pspnr,"标准 WBS: 内部项目号 (具有退出(根据 ID )) posid,"标准项目中的 WBS 元素 post1,"PS: 短描述 (第一行文本) psphi,"当前的内部项目号 - 标准 WBS stufe"项目层次的等级 FROM prpss INTO TABLE @DATA(lt_prpss) WHERE psphi = @ls_projs-pspnr. SORT lt_prpss BY pspnr. IF lt_prpss IS NOT INITIAL. LOOP AT lt_prpss INTO DATA(ls_prpss). CLEAR:gs_wbs_bus2054_new. IF sy-tabix = 1. gs_wbs_bus2054_new-wbs_element = lv_new_pspid. gs_wbs_bus2054_new-user_field_char20_1 = i_input-usr00. gs_wbs_bus2054_new-description = i_input-post1."ls_prpss-post1."PS: 短描述 (第一行文本) ELSE. gs_wbs_bus2054_new-wbs_element = lv_new_pspid && '.' && ls_prpss-posid+10(3)."'NPD-2022037' '.' '001'"工作分解结构元素 (WBS 元素) gs_wbs_bus2054_new-wbs_up = lv_new_pspid."gs_wbs-up_posid. "上级WBS gs_wbs_bus2054_new-description = ls_prpss-post1."PS: 短描述 (第一行文本) ENDIF. gs_wbs_bus2054_new-responsible_no = ls_cj04-vernr."项目经理编号 "gs_wbs_bus2054_new-profit_ctr = ''."gs_wbs-prctr. "利润中心 gs_wbs_bus2054_new-proj_type = ls_prart-prart. "项目类型 gs_wbs_bus2054_new-wbs_account_assignment_element = 'X'."gs_wbs-belkz. "标志：科目分配元素 "gs_wbs_bus2054_new-wbs_billing_element = ''."gs_wbs-fakkz. "标识符： 开票元素 gs_wbs_bus2054_new-wbs_left = ''."gs_wbs-left_posid."左侧WBS "gs_wbs_bus2054_new-user_field_char20_1 = ''."gs_wbs-usr00. "业务类别 "gs_wbs_bus2054_new-user_field_char20_2 = ''."gs_wbs-usr01. "CRM 商机编码 "gs_wbs_bus2054_new-user_field_char10_1 = ''."'X'. "产品 "gs_wbs_bus2054_new-statistical = ''."gs_wbs-xstat. "统计 "gs_wbs_bus2054_new-wbs_cctr_posted_actual = ''."gs_wbs-kostl. "CCtr 过账 APPEND gs_wbs_bus2054_new TO gt_wbs_bus2054_new. CLEAR:ls_prpss. ENDLOOP. CALL FUNCTION 'BAPI_PS_INITIALIZATION'. "创建WBS REFRESH:gt_bapiret2. CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI' EXPORTING i_project_definition = lv_new_pspid TABLES it_wbs_element = gt_wbs_bus2054_new et_return = gt_bapiret2. CLEAR:lv_check,lv_message. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. lv_check = 'E'. lv_message = lv_message && gs_bapiret2-message. CLEAR:gs_bapiret2. ENDLOOP. IF lv_check = 'E'. "错误后初始化 CALL FUNCTION 'ZPS01_PS_FLAG'. e_return-type = 'E'. e_return-message = lv_message. RETURN. ELSE. CLEAR:ls_return. "成功时提交 CALL FUNCTION 'ZPS01_PS_PRECOMMIT' IMPORTING e_return = ls_return. IF ls_return-type = 'E'. e_return-type = 'E'. e_return-message = ls_return-message. RETURN. ENDIF. "--------------------------------创建网络-------------------------------------- CLEAR : gs_net_bus2002_new. gs_net_bus2002_new-project_definition = lv_new_pspid."is_network-pspid. "项目定义 gs_net_bus2002_new-wbs_element = lv_new_pspid."is_network-posid. "工作分解结构元素 (WBS 元素) gs_net_bus2002_new-profile = ls_prart-profid."is_network-ktext. "网络参数文件 CLEAR:ls_prpss. * READ TABLE lt_prpss INTO ls_prpss WITH KEY stufe = 1."获取最上层WBS的描述 * IF sy-subrc EQ 0. * gs_net_bus2002_new-short_text = ls_prpss-post1."is_network-ktext. "描述 * ENDIF. gs_net_bus2002_new-short_text = i_input-post1."ls_prpss-post1."is_network-ktext. "描述 CALL FUNCTION 'BAPI_PS_INITIALIZATION'. "创建网络 REFRESH:gt_bapiret2. CALL FUNCTION 'BAPI_BUS2002_CREATE' EXPORTING i_network = gs_net_bus2002_new TABLES et_return = gt_bapiret2. CLEAR:lv_check,lv_message. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. lv_check = 'E'. lv_message = lv_message && gs_bapiret2-message. CLEAR:gs_bapiret2. ENDLOOP. IF lv_check = 'E'. "错误后初始化 CALL FUNCTION 'ZPS01_PS_FLAG'. e_return-type = 'E'. e_return-message = lv_message. RETURN. ELSE. "成功时提交 REFRESH:gt_bapiret2. CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = gt_bapiret2. CLEAR:lv_check,lv_message. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. lv_check = 'E'. lv_message = lv_message && gs_bapiret2-message. CLEAR:gs_bapiret2. ENDLOOP. IF lv_check EQ 'E'. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'. CALL FUNCTION 'ZPS01_PS_FLAG'. ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. READ TABLE gt_bapiret2 INTO gs_bapiret2 WITH KEY id = 'CNIF_PI' number = '003'. IF sy-subrc EQ 0. lv_aufnr = gs_bapiret2-message_v2. ENDIF. ENDIF. IF ls_return-type = 'E'. e_return-type = 'E'. e_return-message = ls_return-message. RETURN. ENDIF. "--------------------------------创建作业-------------------------------------- READ TABLE lt_prpss INTO ls_prpss WITH KEY stufe = 1."获取最上层WBS的描述 SELECT plko~plnty," plko~plnnr," plko~plnal," plko~zaehl," plko~pspnr," plpo~plnkn," plpo~vornr," plpo~ltxa1," plpo~dauno," plpo~daune," plpo~pspnr AS zbzwbs" FROM plko INNER JOIN plpo ON plko~plnnr = plpo~plnnr INTO TABLE @DATA(lt_plko) WHERE plko~pspnr = @ls_prpss-pspnr AND plko~plnty = '0' AND plpo~plnty = '0'. IF lt_plko IS NOT INITIAL. LOOP AT lt_plko INTO DATA(ls_plko). CLEAR:gs_act_bus2002_new. gs_act_bus2002_new-activity = ls_plko-vornr. "在网络和库网络中的作业编号 gs_act_bus2002_new-description = ls_plko-ltxa1. "工序短文本 gs_act_bus2002_new-control_key = ''."gs_activity-steus. "控制码-内协(ZPS1)和成本（ZPS3） CALL FUNCTION 'CONVERSION_EXIT_KONPT_OUTPUT' EXPORTING input = ls_plko-zbzwbs IMPORTING output = lv_bzwbs. gs_act_bus2002_new-wbs_element = lv_new_pspid && lv_bzwbs+11."工作分解结构元素 (WBS 元素) gs_act_bus2002_new-duration_normal = ls_plko-dauno. "工作时间 gs_act_bus2002_new-duration_normal_unit = ls_plko-daune. "工作时间单位 gs_act_bus2002_new-work_cntr = ''."gs_activity-arbpl. "工作中心 gs_act_bus2002_new-work_activity = ''."gs_activity-arbei. "工作（时间单位H） APPEND gs_act_bus2002_new TO gt_act_bus2002_new. CLEAR:ls_plko. ENDLOOP. CALL FUNCTION 'BAPI_PS_INITIALIZATION'. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = lv_aufnr IMPORTING output = lv_aufnr. CALL FUNCTION 'BAPI_BUS2002_ACT_CREATE_MULTI' EXPORTING i_number = lv_aufnr TABLES it_activity = gt_act_bus2002_new et_return = gt_bapiret2. CLEAR:lv_check,lv_message. LOOP AT gt_bapiret2 INTO gs_bapiret2 WHERE type CA 'AEX'. lv_check = 'E'. lv_message = lv_message && gs_bapiret2-message. CLEAR:gs_bapiret2. ENDLOOP. IF lv_check = 'E'. "错误后初始化 CALL FUNCTION 'ZPS01_PS_FLAG'. e_return-type = 'E'. e_return-message = lv_message. RETURN. ELSE. CLEAR:ls_return. "成功时提交 CALL FUNCTION 'ZPS01_PS_PRECOMMIT' IMPORTING e_return = ls_return. IF ls_return-type = 'E'. e_return-type = 'E'. e_return-message = ls_return-message. RETURN. ENDIF. ENDIF. ELSE. e_return-type = 'E'. e_return-message = '标准项目抬头WBS' && ls_prpss-pspnr && '的作业不存在'. RETURN. ENDIF. ENDIF. ENDIF. ELSE. e_return-type = 'E'. e_return-message = '标准WBS不存在'. RETURN. ENDIF. ENDIF. ELSE. e_return-type = 'E'. e_return-message = '标准项目不存在'. RETURN. ENDIF. "如果预算为空，则不维护预算 IF i_input-wtges IS NOT INITIAL. "维护预算 "设置成本控制范围 SET PARAMETER ID 'CAC' FIELD 'LRCG'. "调用BDC REFRESH:gt_bdcdata[]. PERFORM bdc_dynpro USING 'SAPMKBUD' '0200'. PERFORM bdc_field USING 'BDC_OKCODE' '=MYENTER'. PERFORM bdc_field USING 'BDC_CURSOR' 'PROJ-PSPID'. PERFORM bdc_field USING 'PROJ-PSPID' lv_new_pspid."项目定义 PERFORM bdc_dynpro USING 'SAPLKBPP' '0320'. PERFORM bdc_field USING 'BDC_OKCODE' '=POST'. PERFORM bdc_field USING 'BDC_CURSOR' 'BPDY-WERT1(03)'. CLEAR:lv_wtges. lv_wtges = i_input-wtges. CONDENSE lv_wtges NO-GAPS. PERFORM bdc_field USING 'BPDY-WERT1(01)' lv_wtges."项目预算 lv_ctumode = 'N'. "N就是一步完成，A是分步enter完成 REFRESH gt_messtab[]. CALL TRANSACTION 'CJ30' USING gt_bdcdata MODE lv_ctumode UPDATE 'S' MESSAGES INTO gt_messtab. CLEAR:lv_message,gt_messtab. LOOP AT gt_messtab. CLEAR:lv_msg. CALL FUNCTION 'MESSAGE_TEXT_BUILD' EXPORTING msgid = gt_messtab-msgid msgnr = gt_messtab-msgnr msgv1 = gt_messtab-msgv1 msgv2 = gt_messtab-msgv2 msgv3 = gt_messtab-msgv3 msgv4 = gt_messtab-msgv4 IMPORTING message_text_output = lv_msg. CONCATENATE lv_message lv_msg INTO lv_message. ENDLOOP. READ TABLE gt_messtab WITH KEY msgtyp = 'S' msgid = 'BP' msgnr = '043'. IF sy-subrc = 0 . e_return-type = 'S'. e_return-message = '项目创建成功'. e_return-message_v1 = lv_new_pspid. ELSE. e_return-type = 'E'. e_return-message = '项目创建成功，但预算维护失败'. e_return-message_v1 = lv_new_pspid. ENDIF. ELSE. e_return-type = 'S'. e_return-message = '项目创建成功'. e_return-message_v1 = lv_new_pspid. ENDIF. ENDFUNCTION. "-----------------------------@斌将军-----------------------------
程序中因为多次调用提交和初始化逻辑，因此封装成一个函数
初始化函数
"-----------------------------@斌将军----------------------------- FUNCTION zps01_ps_flag. *"---------------------------------------------------------------------- *"*"本地接口： *"---------------------------------------------------------------------- CALL FUNCTION 'PS_FLAG_INIT_GLOBAL_FLAGS'. CALL FUNCTION 'PS_FLAG_SET_GLOBAL_FLAGS' EXPORTING i_precommit_ok = 'Y'. ENDFUNCTION. "-----------------------------@斌将军-----------------------------
BAPI提交函数
"-----------------------------@斌将军----------------------------- FUNCTION zps01_ps_precommit. *"---------------------------------------------------------------------- *"*"本地接口： *" EXPORTING *" REFERENCE(E_RETURN) TYPE BAPIRETURN *"---------------------------------------------------------------------- DATA:gt_return TYPE TABLE OF bapiret2, gs_return TYPE bapiret2. DATA:lv_check TYPE char1, lv_message TYPE char200. CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = gt_return. CLEAR:lv_check,lv_message. lv_check = 'S'. LOOP AT gt_return INTO gs_return WHERE type CA 'AEX'. lv_check = 'E'. lv_message = lv_message && gs_return-message. CLEAR:gs_return. ENDLOOP. IF sy-subrc EQ 0. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'. CALL FUNCTION 'ZPS01_PS_FLAG'. ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. ENDIF. e_return-type = lv_check. e_return-message = lv_message. ENDFUNCTION. "-----------------------------@斌将军-----------------------------