ANSI / NEMA- MW- 1000-2020 磁铁线标准。. 最新原版

ANSI -NEMA-MW-1000-2020 磁铁线标准

ANSINEMAMW1000-2020MagnetWire.最新原版，可复制文字-行业报告文档类资源-CSDN下载ANSINEMAMW1000-2020MagnetWire.最新原版，可复制文字更多下载资源、学习资料请访问CSDN下载频道.https://download.csdn.net/download/std86021/85926519

 

范围
本出版物旨在以简洁、方便的形式介绍所有现有的磁钢线NEMA标准。它包含电气设备中使用的圆形、矩形和方形薄膜绝缘和/或纤维包覆铜和铝磁体导线的标准。包括电气设备线圈绕组中通常使用的电磁线的定义、型号、尺寸、结构、性能和试验方法。除非另有说明，否则本标准出版物中产品规范的修订不影响在该规范先前版本生效期间制造的产品的合规性。

 

Scope
This publication is designed to present in concise and convenient form all existing NEMA Standards for magnet wire. It contains Standards for round, rectangular, and square film-insulated and/or fibrouscovered copper and aluminum magnet wire for use in electrical apparatus. Included are the definitions, type designations, dimensions, constructions, performance, and test methods for magnet wire generally used in the winding of coils for electrical apparatus. Unless otherwise stated, a revision to a product specification in this Standards publication does not affect  compliance of product manufactured during the time a previous version of that specification was in effect.

Test Procedures
(See Part 1, clause 1.3, for Definitions; clause 1.6 for Test Conditions and Parameters)
3.1 Safety Statement
It is not the intent of this Standard to address all of the safety issues associated with its use. It is
the responsibility of the user of this Standard to train personnel; establish proper health and safety
procedures; and be aware of local, state, and national regulatory restrictions that may apply.
chemical hazard: some tests use materials that local, state, and national regulatory agencies have
determined to be hazardous. These tests shall be performed under controlled conditions that allow for
proper safety and protection of personnel. Information and instructions contained in Safety Data Sheets
(SDS) for handling, working, and disposal of hazardous chemicals shall be followed. Furthermore,
discharges of these chemicals to the environment (the air, water, or ground) must comply with the latest
applicable regulations.
electrical hazard: certain test procedures require high voltage. It is important that the equipment be
designed to comply with good engineering practices—with safety being an integral part of the design.
To avoid electric shocks in such cases, necessary precautions must be taken and test equipment
manufacturers’ recommendations shall be followed.
mechanical hazard: some tests utilizing mechanical equipment may expose the operator to mechanical
hazards. Care must be exercised to protect eyes, fingers, hands, and other body parts from injury.
thermal hazard: in tests requiring elevated temperatures, precautions must be taken in handling
materials exposed to heat to avoid skin burns.