ZTE ZXR10 5250 command hints

enable !! enter the privileged mode

write !! save the config

reboot !! reboot

hostname myZTE

show run/start/arp/mac/ipport/iproute/port/vlan

set stp enable/disable

set port … enable/disable

Login

create user admin admin
set user local admin login-password zhongxing !! CLI login
set user local admin admin-possword zhongxing !! enable secret or web login

set ssh enable
set ssh regenerate
show ssh

Vlan

set vlan 99 enable
set vlan 100 enable
set vlan 100 add port 1 [untag]
set port 1 pvid 100
set vlan 99 add port 2
set port 2 pvid 99
set vlan 99 add port 24 tag
set vlan 100 add port 24 tag !! no need to specify pvid for a trunk port

Vlanif And Route

config router !! enter layer3 config mode
set ipport 0 enable/disable
set ipport 0 vlan 100
set ipport 0 ipaddress …
clear ipport 0 …
iproute …

config tffs !! configure file system
copy startrun.date startrun.dat.bak

Caution

set port 24 vlan-trunk enable !! This command will tag all vlans including vlan 1 leaving port 24. Don’t use this command.