ArduPilot开源飞控之AP_Baro_DroneCAN

1. 源由

鉴于ArduPilot开源飞控之AP_Baro中涉及Sensor Driver有以下总线类型：

1. I2C
2. Serial UART
3. CAN
4. SITL //模拟传感器(暂时并列放在这里)

ArduPilot之开源代码Sensor Drivers设计的front-end / back-end分层设计思路，AP_Baro主要描述的是front-end。

为了更好的从整体理解气压计这个传感器的嵌入式应用，这里深入到back-end驱动层，针对基于CAN协议的气压计设备，进行一个研读和理解。

2. back-end抽象类

AP_Baro_Backend驱动层需实现方法：

• void update()
• static AP_Baro_Backend *probe(AP_Baro &baro, AP_HAL::OwnPtr dev)

注：通常来说使用ChibiOS的都有定时器，如果没有定时器，可以使用void accumulate(void)来实现传感器的数据定时获取。

class AP_Baro_Backend
{
public:
    AP_Baro_Backend(AP_Baro &baro);
    virtual ~AP_Baro_Backend(void) {};

    // each driver must provide an update method to copy accumulated
    // data to the frontend
    virtual void update() = 0;

    // accumulate function. This is used for backends that don't use a
    // timer, and need to be called regularly by the main code to
    // trigger them to read the sensor
    virtual void accumulate(void) {}

    void backend_update(uint8_t instance);

    //  Check that the baro valid by using a mean filter.
    // If the value further that filtrer_range from mean value, it is rejected.
    bool pressure_ok(float press);
    uint32_t get_error_count() const { return _error_count; }

#if AP_BARO_MSP_ENABLED
    virtual void handle_msp(const MSP::msp_baro_data_message_t &pkt) {}
#endif

#if AP_BARO_EXTERNALAHRS_ENABLED
    virtual void handle_external(const AP_ExternalAHRS::baro_data_message_t &pkt) {}
#endif

    /*
      device driver IDs. These are used to fill in the devtype field
      of the device ID, which shows up as BARO_DEVID* parameters to
      users.
     */
    enum DevTypes {
        DEVTYPE_BARO_SITL     = 0x01,
        DEVTYPE_BARO_BMP085   = 0x02,
        DEVTYPE_BARO_BMP280   = 0x03,
        DEVTYPE_BARO_BMP388   = 0x04,
        DEVTYPE_BARO_DPS280   = 0x05,
        DEVTYPE_BARO_DPS310   = 0x06,
        DEVTYPE_BARO_FBM320   = 0x07,
        DEVTYPE_BARO_ICM20789 = 0x08,
        DEVTYPE_BARO_KELLERLD = 0x09,
        DEVTYPE_BARO_LPS2XH   = 0x0A,
        DEVTYPE_BARO_MS5611   = 0x0B,
        DEVTYPE_BARO_SPL06    = 0x0C,
        DEVTYPE_BARO_UAVCAN   = 0x0D,
        DEVTYPE_BARO_MSP      = 0x0E,
        DEVTYPE_BARO_ICP101XX = 0x0F,
        DEVTYPE_BARO_ICP201XX = 0x10,
        DEVTYPE_BARO_MS5607   = 0x11,
        DEVTYPE_BARO_MS5837   = 0x12,
        DEVTYPE_BARO_MS5637   = 0x13,
        DEVTYPE_BARO_BMP390   = 0x14,
    };
    
protected:
    // reference to frontend object
    AP_Baro &_frontend;

    void _copy_to_frontend(uint8_t instance, float pressure, float temperature);

    // semaphore for access to shared frontend data
    HAL_Semaphore _sem;

    virtual void update_healthy_flag(uint8_t instance);

    // mean pressure for range filter
    float _mean_pressure; 
    // number of dropped samples. Not used for now, but can be usable to choose more reliable sensor
    uint32_t _error_count;

    // set bus ID of this instance, for BARO_DEVID parameters
    void set_bus_id(uint8_t instance, uint32_t id) {
        _frontend.sensors[instance].bus_id.set(int32_t(id));
    }
};
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79

3. 方法实现

由于气压数据来自CAN总线，因此，其逻辑与MSP协议类似，相对简单，没有校准等复杂物理公式。

3.1 probe

实例初始化。

AP_Baro_DroneCAN::probe
 ├──> WITH_SEMAPHORE(_sem_registry);
 ├──> AP_Baro_DroneCAN* backend = nullptr;
 │
 ├──> 
 │   └──> <_detected_modules[i].driver == nullptr && _detected_modules[i].ap_dronecan != nullptr>
 │       │
 │       │    /********************************************************************************
 │       │     * Registered DroneCAN Baro Node                                                *
 │       │     ********************************************************************************/
 │       ├──> backend = new AP_Baro_DroneCAN(baro);
 │       ├──> 
 │       │   └──> AP::can().log_text(AP_CANManager::LOG_ERROR,LOG_TAG,
 │       │                  "Failed register DroneCAN Baro Node %d on Bus %d\n",
 │       │                  _detected_modules[i].node_id,
 │       │                  _detected_modules[i].ap_dronecan->get_driver_index());
 │       ├──> 
 │       │   ├──> _detected_modules[i].driver = backend;
 │       │   ├──> backend->_pressure = 0;
 │       │   ├──> backend->_pressure_count = 0;
 │       │   ├──> backend->_ap_dronecan = _detected_modules[i].ap_dronecan;
 │       │   ├──> backend->_node_id = _detected_modules[i].node_id;
 │       │   ├──> backend->_instance = backend->_frontend.register_sensor();
 │       │   ├──> backend->set_bus_id(backend->_instance, AP_HAL::Device::make_bus_id(AP_HAL::Device::BUS_TYPE_UAVCAN,
 │       │   │                                                                      _detected_modules[i].ap_dronecan->get_driver_index(),
 │       │   │                                                                      backend->_node_id, 0));
 │       │   └──> AP::can().log_text(AP_CANManager::LOG_INFO,LOG_TAG,
 │       │                  "Registered DroneCAN Baro Node %d on Bus %d\n",
 │       │                  _detected_modules[i].node_id,
 │       │                  _detected_modules[i].ap_dronecan->get_driver_index());
 │       └──> break;
 └──> return backend;
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

3.2 update

front-end / back-end数据更新。

AP_Baro_DroneCAN::update
 ├──> float pressure = 0;
 ├──> WITH_SEMAPHORE(_sem_baro);
 └──> 
     ├──> <_pressure_count != 0>
     │   ├──> pressure = _pressure / _pressure_count;
     │   ├──>_pressure_count = 0;
     │   └──>_pressure = 0;
     ├──> _copy_to_frontend(_instance, pressure, _temperature);
     ├──> _frontend.set_external_temperature(_temperature);
     └──> new_pressure = false;
1
2
3
4
5
6
7
8
9
10
11

3.3 subscribe_msgs

CAN协议消息处理钩子。

AP_Baro_DroneCAN::subscribe_msgs
 ├──> ap_dronecan == nullptr>
 │   └──> return;
 ├──> get_driver_index()) == nullptr>
 │   └──> AP_BoardConfig::allocation_error("pressure_sub");
 └──> get_driver_index()) == nullptr>
     └──> AP_BoardConfig::allocation_error("temperature_sub");
1
2
3
4
5
6
7

3.4 handle_pressure/handle_temperature

处理CAN协议中气压数据。

AP_Baro_DroneCAN::handle_pressure
 ├──> WITH_SEMAPHORE(_sem_registry);
 ├──> driver = get_dronecan_backend(ap_dronecan, transfer.source_node_id, true);
 ├──> 
 │   └──> return;
 └──> WITH_SEMAPHORE(driver->_sem_baro);
     ├──> _update_and_wrap_accumulator(&driver->_pressure, msg.static_pressure, &driver->_pressure_count, 32);
     └──> driver->new_pressure = true;
1
2
3
4
5
6
7
8

处理CAN协议中温度数据。

AP_Baro_DroneCAN::handle_temperature
 ├──> WITH_SEMAPHORE(_sem_registry);
 ├──> driver = get_dronecan_backend(ap_dronecan, transfer.source_node_id, false);
 ├──> 
 │   └──> return;
 └──> WITH_SEMAPHORE(driver->_sem_baro);
     └──> driver->_temperature = KELVIN_TO_C(msg.static_temperature);
1
2
3
4
5
6
7

3.5 CAN port

目前的官方文档有不一致的问题，希望后续能有完善和更新。

• 【1】Inconsistent CAN startup documentation
• 【2】Inconsistent CAN startup documentation #5475

init_ardupilot
 └──> AP_CANManager::init
     └──> AP_DroneCAN::init
         └──> AP_Baro_DroneCAN::subscribe_msgs
1
2
3
4

4. 参考资料

【1】ArduPilot开源飞控系统之简单介绍
【2】ArduPilot之开源代码Task介绍
【3】ArduPilot飞控启动&运行过程简介
【4】ArduPilot之开源代码Library&Sketches设计
【5】ArduPilot之开源代码Sensor Drivers设计