• K8s集群环境搭建

    K8s集群环境搭建

    1、环境规划

    1.1 集群类型

    Kubernetes集群大体上分为两类：一主多从和多主多从

    • 一主多从：一台master节点和多台node节点，搭建简单，但是有单机故障风险，适用于测试环境
    • 多主多从：多台master节点和多台node节点，搭建麻烦，安全性高，适用于生产环境

    image-20221117141443024

    1.2 安装方式

    Kubernetes有多种部署方式，目前主流的方式有kubeadm、minikube、二进制包

    说明：现在需要安装kubernetes的集群环境，但是又不想过于麻烦，所有选择使用kubeadm方式

    1.3 准备环境

    image-20221117141842079

    角色 ip地址 组件
    master 192.168.111.100 docker，kubectl，kubeadm，kubelet
    node1 192.168.111.101 docker，kubectl，kubeadm，kubelet
    node2 192.168.111.102 docker，kubectl，kubeadm，kubelet

    2、环境搭建

    说明：

    本次环境搭建需要安装三台Linux系统（一主二从），内置centos7.5系统，然后在每台linux中分别安装docker。kubeadm（1.25），kubelet（1.25.4），kubelet（1.25.4）.

    2.1 主机安装

    • 安装虚拟机过程中注意下面选项的设置：

    • 操作系统环境：cpu2个 内存2G 硬盘50G centos7+

    • 语言：中文简体/英文

    • 软件选择：基础设施服务器

    • 分区选择：自动分区/手动分区

    • 网络配置：按照下面配置网络地址信息

    • 网络地址：192.168.100.（100、10、20）

    • 子网掩码：255.255.255.0

    • 默认网关：192.168.100.254

    • DNS：8.8.8.8

    • 主机名设置：

    • Master节点：master

    • Node节点：node1

    • Node节点：node2

    2.2 环境初始化

    1. 查看操作系统的版本

      # 此方式下安装kubernetes集群要求Centos版本要在7.5或之上
[root@master ~]#cat /etc/redhat-release
CentOS Stream release 8

    2. 主机名解析 （三个节点都做）

      # 为了方便集群节点间的直接调用，在这个配置一下主机名解析，企业中推荐使用内部DNS服务器
[root@master ~]#cat >> /etc/hosts << EOF
> 192.168.111.100 master.example.com master
> 192.168.111.101 node1.example.com node1
> 192.168.111.102 node2.example.com node2
> EOF

[root@master ~]#scp /etc/hosts root@192.168.111.101:/etc/hosts
The authenticity of host '192.168.111.101 (192.168.111.101)' can't be established.
ECDSA key fingerprint is SHA256:0UQKIYmXwgllRaiKyKIR8RaO8bzS7GGb5180xGHoiMI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.111.101' (ECDSA) to the list of known hosts.
root@192.168.111.101's password: 
hosts                                                                                       100%  280   196.1KB/s   00:00    
[root@master ~]#scp /etc/hosts root@192.168.111.102:/etc/hosts
The authenticity of host '192.168.111.102 (192.168.111.102)' can't be established.
ECDSA key fingerprint is SHA256:0UQKIYmXwgllRaiKyKIR8RaO8bzS7GGb5180xGHoiMI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.111.102' (ECDSA) to the list of known hosts.
root@192.168.111.102's password: 
hosts

    3. 时钟同步

      # kubernetes要求集群中的节点时间必须精确一致，这里使用chronyd服务从网络同步时间，企业中建议配置内部的时间同步服务器
-master节点
[root@master ~]#vim /etc/chrony.conf
local stratum 10
[root@master ~]#systemctl restart chronyd.service
[root@master ~]#systemctl enable chronyd.service
[root@master ~]#hwclock -w

-node1节点
[root@node1 ~]#vim /etc/chrony.conf
server master.example.com iburst
...
[root@node1 ~]#systemctl restart chronyd.service 
[root@node1 ~]#systemctl enable chronyd.service 
[root@node1 ~]#hwclock -w

-node2节点
[root@node2 ~]#vim /etc/chrony.conf 
server master.example.com iburst
...
[root@node2 ~]#systemctl restart chronyd.service 
[root@node2 ~]#systemctl enable chronyd.service
[root@node2 ~]#hwclock -w

    4. 禁用firewalld、selinux、postfix（三个节点都做）

      # 关闭防火墙、selinux，postfix----3台主机都配置
-master节点
[root@master ~]#systemctl disable --now firewalld
[root@master ~]#sed -i 's/enforcing/disabled/' /etc/selinux/config
[root@master ~]#setenforce 0
[root@master ~]#systemctl stop postfix
[root@master ~]#systemctl disable postfix

-node1节点
[root@node1 ~]#systemctl disable --now firewalld
[root@node1 ~]#sed -i 's/enforcing/disabled/' /etc/selinux/config
[root@node1 ~]#setenforce 0
[root@node1 ~]#systemctl stop postfix
[root@node1 ~]#systemctl disable postfix

-node2节点
[root@node2 ~]#systemctl disable --now firewalld
[root@node2 ~]#sed -i 's/enforcing/disabled/' /etc/selinux/config
[root@node2 ~]#setenforce 0
[root@node2 ~]#systemctl stop postfix
[root@node2 ~]#systemctl disable postfix

    5. 禁用swap分区（三个节点都做）

      -master节点
[root@master ~]#vim /etc/fstab # 注释掉swap分区那一行
[root@master ~]#swapoff -a

-node1节点
[root@node1 ~]#vim /etc/fstab # 注释掉swap分区那一行
[root@node1 ~]#swapoff -a

-node1节点
[root@node2 ~]#vim /etc/fstab # 注释掉swap分区那一行
[root@node2 ~]#swapoff -a

    6. 开启IP转发，和修改内核信息---三个节点都需要配置

      -master节点
[root@master ~]#vim /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[root@master ~]#modprobe   br_netfilter
[root@master ~]#sysctl -p  /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1

-node1节点
[root@node1 ~]#vim /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[root@node1 ~]#modprobe   br_netfilter
[root@node1 ~]#sysctl -p  /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1

-node1节点
[root@node2 ~]#vim /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[root@node2 ~]#modprobe   br_netfilter
[root@node2 ~]#sysctl -p  /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1

    7. 配置IPVS功能（三个节点都做）

      -master节点
[root@master ~]#vim /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh

[root@master ~]#chmod +x /etc/sysconfig/modules/ipvs.modules
[root@master ~]#bash /etc/sysconfig/modules/ipvs.modules
[root@master ~]#lsmod | grep -e ip_vs
ip_vs_sh               16384  0
ip_vs_wrr              16384  0
ip_vs_rr               16384  0
ip_vs                 172032  6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack          172032  1 ip_vs
nf_defrag_ipv6         20480  2 nf_conntrack,ip_vs
libcrc32c              16384  3 nf_conntrack,xfs,ip_vs
[root@master ~]#reboot

-node1节点
[root@node1 ~]#vim /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh

[root@node1 ~]#chmod +x /etc/sysconfig/modules/ipvs.modules
[root@node1 ~]#bash /etc/sysconfig/modules/ipvs.modules
[root@node1 ~]#lsmod | grep -e ip_vs
ip_vs_sh               16384  0
ip_vs_wrr              16384  0
ip_vs_rr               16384  0
ip_vs                 172032  6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack          172032  1 ip_vs
nf_defrag_ipv6         20480  2 nf_conntrack,ip_vs
libcrc32c              16384  3 nf_conntrack,xfs,ip_vs
[root@node1 ~]#reboot

-node2节点
[root@node2 ~]#vim /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh

[root@node2 ~]#chmod +x /etc/sysconfig/modules/ipvs.modules
[root@node2 ~]#bash /etc/sysconfig/modules/ipvs.modules
[root@node2 ~]#lsmod | grep -e ip_vs
ip_vs_sh               16384  0
ip_vs_wrr              16384  0
ip_vs_rr               16384  0
ip_vs                 172032  6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack          172032  1 ip_vs
nf_defrag_ipv6         20480  2 nf_conntrack,ip_vs
libcrc32c              16384  3 nf_conntrack,xfs,ip_vs
[root@node2 ~]#reboot

    8. ssh免密认证

      [root@master ~]#ssh-keygen 
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa): 
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:VcZ6m+gceBJxwysFWwM08526KiBoSt9qdbDQoMSx3kU root@master
The key's randomart image is:
+---[RSA 3072]----+
|...  E .*+o.o    |
| o...   .*==..   |
|... o.  .+o+o    |
|.....o  o.o..    |
| o .. o S+.o o   |
|.o. .o .o +.o    |
|+ ..o..  =..     |
|.  o ..  .o      |
|  ...  ..        |
+----[SHA256]-----+
[root@master ~]#ssh-copy-id -i ~/.ssh/id_rsa.pub root@node1
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'node1 (192.168.111.101)' can't be established.
ECDSA key fingerprint is SHA256:0UQKIYmXwgllRaiKyKIR8RaO8bzS7GGb5180xGHoiMI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node1's password: 

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh 'root@node1'"
and check to make sure that only the key(s) you wanted were added.

[root@master ~]#ssh-copy-id -i ~/.ssh/id_rsa.pub root@node2
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'node2 (192.168.111.102)' can't be established.
ECDSA key fingerprint is SHA256:0UQKIYmXwgllRaiKyKIR8RaO8bzS7GGb5180xGHoiMI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node2's password: 

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh 'root@node2'"
and check to make sure that only the key(s) you wanted were added.

    2.3、安装docker

    1. 切换镜像源

      -master节点
[root@master /etc/yum.repos.d]#curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-vault-8.5.2111.repo
[root@master /etc/yum.repos.d]# dnf -y install epel-release
[root@master /etc/yum.repos.d]#wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

-node1节点
[root@node1 /etc/yum.repos.d]#curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-vault-8.5.2111.repo
[root@node1 /etc/yum.repos.d]# dnf -y install epel-release
[root@node1 /etc/yum.repos.d]#wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

-node2节点
[root@node2 /etc/yum.repos.d]#curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-vault-8.5.2111.repo
[root@node2 /etc/yum.repos.d]# dnf -y install epel-release
[root@node2 /etc/yum.repos.d]#wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

    2. 安装docker-ce

      -master节点
[root@master ~]# dnf -y install docker-ce --allowerasing
[root@master ~]# systemctl restart docker
[root@master ~]# systemctl enable docker

-node1节点
[root@node1 ~]# dnf -y install docker-ce --allowerasing
[root@node1 ~]# systemctl restart docker
[root@node1 ~]# systemctl enable docker

-node2节点
[root@node2 ~]# dnf -y install docker-ce --allowerasing
[root@node2 ~]# systemctl restart docker
[root@node2 ~]# systemctl enable docker

    3. 添加一个配置文件，配置docker仓库加速器

      -master节点
[root@master ~]#cat > /etc/docker/daemon.json << EOF
 {
   "registry-mirrors": ["https://6vrrj6n2.mirror.aliyuncs.com"],
   "exec-opts": ["native.cgroupdriver=systemd"],
   "log-driver": "json-file",
   "log-opts": {
     "max-size": "100m"
   },
   "storage-driver": "overlay2"
 }
 EOF
[root@master ~]#systemctl daemon-reload
[root@master ~]#systemctl  restart docker

-node1节点
[root@node1 ~]#cat > /etc/docker/daemon.json << EOF
 {
   "registry-mirrors": ["https://6vrrj6n2.mirror.aliyuncs.com"],
   "exec-opts": ["native.cgroupdriver=systemd"],
   "log-driver": "json-file",
   "log-opts": {
     "max-size": "100m"
   },
   "storage-driver": "overlay2"
 }
 EOF
[root@node1 ~]#systemctl daemon-reload
[root@node1 ~]#systemctl  restart docker

-node2节点
[root@node2 ~]#cat > /etc/docker/daemon.json << EOF
 {
   "registry-mirrors": ["https://6vrrj6n2.mirror.aliyuncs.com"],
   "exec-opts": ["native.cgroupdriver=systemd"],
   "log-driver": "json-file",
   "log-opts": {
     "max-size": "100m"
   },
   "storage-driver": "overlay2"
 }
 EOF
[root@node2 ~]#systemctl daemon-reload
[root@node2 ~]#systemctl  restart docker

    2.4 安装kubernetes组件

    1. 由于kubernetes的镜像在国外，速度比较慢，这里切换成国内的镜像源

      -master节点
[root@master ~]#cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

-node1节点
[root@node1 ~]#cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

-node2节点
[root@node2 ~]#cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

    2. 安装kubeadm kubelet kubectl工具

      -master节点
[root@master ~]#dnf  -y  install kubeadm  kubelet  kubectl
[root@master ~]#systemctl  restart  kubelet
[root@master ~]#systemctl  enable  kubelet

-node1节点
[root@node1 ~]#dnf  -y  install kubeadm  kubelet  kubectl
[root@node1 ~]#systemctl  restart  kubelet
[root@node1 ~]#systemctl  enable  kubelet

-node2节点
[root@node2 ~]#dnf  -y  install kubeadm  kubelet  kubectl
[root@node2 ~]#systemctl  restart  kubelet
[root@node2 ~]#systemctl  enable  kubelet

    3. 配置containerd

      # 为确保后面集群初始化及加入集群能够成功执行，需要配置containerd的配置文件/etc/containerd/config.toml，此操作需要在所有节点执行
-master节点
[root@master ~]#containerd config default > /etc/containerd/config.toml
# 将/etc/containerd/config.toml文件中的k8s镜像仓库改为registry.aliyuncs.com/google_containers
[root@master ~]#vim /etc/containerd/config.toml
sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.6"
# 然后重启并设置containerd服务
[root@master ~]#systemctl   restart  containerd
[root@master ~]#systemctl   enable  containerd

# 为确保后面集群初始化及加入集群能够成功执行，需要配置containerd的配置文件/etc/containerd/config.toml，此操作需要在所有节点执行
-node1节点
[root@node1 ~]#containerd config default > /etc/containerd/config.toml
# 将/etc/containerd/config.toml文件中的k8s镜像仓库改为registry.aliyuncs.com/google_containers
[root@node1 ~]#vim /etc/containerd/config.toml
sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.6"
# 然后重启并设置containerd服务
[root@node1 ~]#systemctl   restart  containerd
[root@node1 ~]#systemctl   enable  containerd

# 为确保后面集群初始化及加入集群能够成功执行，需要配置containerd的配置文件/etc/containerd/config.toml，此操作需要在所有节点执行
-node2节点
[root@node2 ~]#containerd config default > /etc/containerd/config.toml
# 将/etc/containerd/config.toml文件中的k8s镜像仓库改为registry.aliyuncs.com/google_containers
[root@node2 ~]#vim /etc/containerd/config.toml
sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.6"
# 然后重启并设置containerd服务
[root@node2 ~]#systemctl   restart  containerd
[root@node2 ~]#systemctl   enable  containerd

    4. 部署k8s的master节点

      -master节点
[root@master ~]#kubeadm init \
  --apiserver-advertise-address=192.168.111.100 \
  --image-repository registry.aliyuncs.com/google_containers \
  --kubernetes-version v1.25.4 \
  --service-cidr=10.96.0.0/12 \
  --pod-network-cidr=10.244.0.0/16
# 建议将初始化内容保存在某个文件中
[root@master ~]#vim k8s 
To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.111.100:6443 --token eav8jn.zj2muv0thd7e8dad \
	--discovery-token-ca-cert-hash sha256:b38f8a6a6302e25c0bcba2a67c13b234fd0b9fdd8b0c0645154c79edf6555e09 

[root@master ~]#vim /etc/profile.d/k8s.sh
export KUBECONFIG=/etc/kubernetes/admin.conf
[root@master ~]#source /etc/profile.d/k8s.sh

    5. 安装pod网络插件

      -master节点
[root@master ~]#wget https://raw.githubusercontent.com/flannel-io/flannel/master/Documentation/kube-flannel.yml
[root@master ~]#kubectl apply -f kube-flannel.yml 
namespace/kube-flannel created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
[root@master ~]#kubectl get nodes
NAME     STATUS     ROLES           AGE     VERSION
master   NotReady   control-plane   6m41s   v1.25.4
[root@master ~]#kubectl get nodes
NAME     STATUS   ROLES           AGE     VERSION
master   Ready    control-plane   7m10s   v1.25.4

    6. 将node节点加入到k8s集群中

      -node1节点
[root@node1 ~]#kubeadm join 192.168.111.100:6443 --token eav8jn.zj2muv0thd7e8dad \
> --discovery-token-ca-cert-hash sha256:b38f8a6a6302e25c0bcba2a67c13b234fd0b9fdd8b0c0645154c79edf6555e09 

-node2节点
[root@node2 ~]#kubeadm join 192.168.111.100:6443 --token eav8jn.zj2muv0thd7e8dad \
> --discovery-token-ca-cert-hash sha256:b38f8a6a6302e25c0bcba2a67c13b234fd0b9fdd8b0c0645154c79edf6555e09

    7. kubectl get nodes 查看node状态

      -master节点
[root@master ~]#kubectl get nodes
NAME     STATUS     ROLES           AGE     VERSION
master   Ready      control-plane   9m37s   v1.25.4
node1    NotReady             51s     v1.25.4
node2    NotReady             31s     v1.25.4
[root@master ~]#kubectl get nodes
NAME     STATUS   ROLES           AGE     VERSION
master   Ready    control-plane   9m57s   v1.25.4
node1    Ready              71s     v1.25.4
node2    Ready              51s     v1.25.4

    8. 使用k8s集群创建一个pod，运行nginx容器，然后进行测试

      [root@master ~]#kubectl create  deployment  nginx  --image nginx
deployment.apps/nginx created
[root@master ~]#kubectl  get  pods
NAME                    READY   STATUS    RESTARTS   AGE
nginx-76d6c9b8c-z7p4l   1/1     Running   0          35s
[root@master ~]#kubectl  expose  deployment  nginx  --port 80  --type NodePort
service/nginx exposed
[root@master ~]#kubectl  get  pods  -o  wide
NAME                    READY   STATUS    RESTARTS   AGE    IP           NODE    NOMINATED NODE   READINESS GATES
nginx-76d6c9b8c-z7p4l   1/1     Running   0          119s   10.244.1.2   node1              
[root@master ~]#kubectl  get  services
NAME         TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
kubernetes   ClusterIP   10.96.0.1               443/TCP        15m
nginx        NodePort    10.109.37.202           80:31125/TCP   17s

    9. 测试访问

      image-20221117165705706

    10. 修改默认网页

      [root@master ~]# kubectl exec -it pod/nginx-76d6c9b8c-z7p4l -- /bin/bash
root@nginx-76d6c9b8c-z7p4l:/# cd /usr/share/nginx/html/
echo "zhaoshulin" > index.html

    image-20221117170031199


    __EOF__

  • 本文作者： Alone-林
  • 本文链接： https://www.cnblogs.com/Alone-8712/p/16900093.html
  • 关于博主： 评论和私信会在第一时间回复。或者直接私信我。
  • 版权声明： 本博客所有文章除特别声明外，均采用 BY-NC-SA 许可协议。转载请注明出处！
  • 声援博主： 如果您觉得文章对您有帮助，可以点击文章右下角【推荐】一下。
  • 相关阅读:
    在MySQL中添加索引
    Redis分布式Session和普通的cookie session有什么区别？
    Python中的桌面应用开发库有哪些？
    HTTPS应该搞懂了吧。
    3.10-容器的操作
    AJAX初
    CSS前端入门（第二天）选择器
    基于 Transformation-Equivariant 的自动驾驶 3D 目标检测
    Python实现SSA智能麻雀搜索算法优化XGBoost回归模型(XGBRegressor算法)项目实战
    线性代数（五） | 矩阵对角化 特征值 特征向量
  • 原文地址：https://www.cnblogs.com/Alone-8712/p/16900093.html