• 华为无线设备配置Mesh业务


    在这里插入图片描述

    1. 配AC与AP1之间网络互通
      [LSW1]vlan batch 100
      [LSW1-GigabitEthernet0/0/1]port link-type trunk
      [LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
      [LSW1-GigabitEthernet0/0/1]port trunk pvid vlan 100
      [LSW1-GigabitEthernet0/0/1]port-isolate enable
      [LSW1-GigabitEthernet0/0/2]port link-type trunk
      [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
      [LSW2]vlan batch 100
      [LSW2-GigabitEthernet0/0/1]port link-type trunk
      [LSW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
      [LSW2-GigabitEthernet0/0/2]port link-type trunk
      [LSW2-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
      [AC1]vlan batch 100
      [AC1-GigabitEthernet0/0/1]port link-type trunk
      [AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
    2. 配置AC的DHCP功能,为AP分配IP地址
      [AC1]dhcp enable
      [AC1]int Vlanif 100
      [AC1-Vlanif100]ip add 10.1.100.1 24
      [AC1-Vlanif100]dhcp select interface
    3. 配置AP组、国家码和AC的源接口
      创建MPP的AP组和MP的AP组,用于将相同配置的AP都加入同一AP组中
      [AC1]wlan
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-view]ap-group name mesh-mp
      创建域管理模板,在域管理模板下配置AC的国家码并在AP组下引用域管理模板
      [AC1-wlan-view]regulatory-domain-profile name domain1
      [AC1-wlan-regulate-domain-domain1]country-code cn
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-ap-group-mesh-mpp]regulatory-domain-profile domain1
      [AC1-wlan-view]ap-group name mesh-mp
      [AC1-wlan-ap-group-mesh-mp]regulatory-domain-profile domain1
      配置AC的源接口
      [AC1]capwap source interface Vlanif 100
      配置AP加入AP组
      [AC1]wlan
      [AC1-wlan-view]ap auth-mode mac-auth
      [AC1-wlan-view]ap-id 1 ap-mac 00e0-fcde-7300
      [AC1-wlan-ap-1]ap-name ap1
      [AC1-wlan-ap-1]ap-group mesh-mpp
      [AC1-wlan-view]ap-id 2 ap-mac 00e0-fcbc-2e90
      [AC1-wlan-ap-2]ap-name ap2
      [AC1-wlan-ap-2]ap-group mesh-mp
      [AC1-wlan-view]ap-id 3 ap-mac 00e0-fc9f-7e50
      [AC1-wlan-ap-3]ap-name ap3
      [AC1-wlan-ap-3]ap-group mesh-mp
    4. 配置Mesh业务参数
      配置Mesh节点使用的主要射频参数
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-ap-group-mesh-mpp]radio 1
      [AC1-wlan-group-radio-mesh-mpp/1]channel 40mhz-plus 157
      [AC1-wlan-group-radio-mesh-mpp/1]coverage distance 4
      [AC1-wlan-view]ap-group name mesh-mp
      [AC1-wlan-ap-group-mesh-mp]radio 1
      [AC1-wlan-group-radio-mesh-mp/1]channel 40mhz-plus 157
      [AC1-wlan-group-radio-mesh-mp/1]coverage distance 4
      配置AP有线口参数
      [AC1-wlan-view]wired-port-profile name wired-port
      [AC1-wlan-wired-port-wired-port]vlan tagged 101
      配置Mesh链路使用的安全模板
      [AC1-wlan-view]security-profile name mesh-sec
      [AC1-wlan-sec-prof-mesh-sec]security wpa2 psk pass-phrase abc@1234 aes
      配置Mesh白名单
      [AC1-wlan-view]mesh-whitelist-profile name mesh-list
      [AC1-wlan-mesh-whitelist-mesh-list]peer-ap mac 00e0-fcde-7300
      [AC1-wlan-mesh-whitelist-mesh-list]peer-ap mac 00e0-fcbc-2e90
      [AC1-wlan-mesh-whitelist-mesh-list]peer-ap mac 00e0-fc9f-7e50
      配置Mesh角色:配置AP1的Mesh角色为“mesh-portal”,缺省Mesh角色为“mesh-node”,所以AP2、AP3可以使用默认配置。Mesh角色是通过AP系统模板配置的
      [AC1-wlan-view]ap-system-profile name mesh-sys
      [AC1-wlan-ap-system-prof-mesh-sys]mesh-role mesh-portal
      配置Mesh模板
      [AC1-wlan-view]mesh-profile name mesh-net
      [AC1-wlan-mesh-prof-mesh-net]mesh-id mesh-net
      [AC1-wlan-mesh-prof-mesh-net]link-aging-time 30
      [AC1-wlan-mesh-prof-mesh-net]security-profile mesh-sec
      配置AP射频引用Mesh白名单模板
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-ap-group-mesh-mpp]radio 1
      [AC1-wlan-group-radio-mesh-mpp/1]mesh-whitelist-profile mesh-list
      [AC1-wlan-view]ap-group name mesh-mp
      [AC1-wlan-ap-group-mesh-mp]radio 1
      [AC1-wlan-group-radio-mesh-mp/1]mesh-whitelist-profile mesh-list
    5. 在AP组引用相关模板
      配置AP组引用有线口模板,使Mesh业务生效,使AP的有线口参数在Mesh各节点上生效
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-ap-group-mesh-mpp]wired-port-profile wired-port gigabitethernet 0
      [AC1-wlan-ap-group-mesh-mp]wired-port-profile wired-port gigabitethernet 0
      配置AP组引用AP系统模板,使MPP角色在AP1上生效
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-ap-group-mesh-mpp]ap-system-profile mesh-sys
      配置AP组引用Mesh模板,使Mesh业务生效
      [AC1-wlan-view]ap-group name mesh-mpp
      [AC1-wlan-ap-group-mesh-mpp]mesh-profile mesh-net radio 1
      [AC1-wlan-view]ap-group name mesh-mp
      [AC1-wlan-ap-group-mesh-mp]mesh-profile mesh-net radio 1
  • 相关阅读:
    Redis - 底层数据结构
    Spring通知类型简介说明及使用ProxyFactoryBean创建AOP代理的示例分享
    puppeteer
    Mysql查询(SELECT)
    华为OD:求字符串中所有整数的最小和
    在Ubuntu20.04安装StarRocks On Docker并在DataGrip配置JDBC协议连接容器内StarRocks2.3.2
    QGraphicsItem图元坐标和在场景中的坐标(六)
    Docker核心原理与实操
    携创教育:2022下半年自考延期省市有哪些?公告是什么?
    UG NX二次开发(C#)-获取UI中选择对象的handle值
  • 原文地址:https://blog.csdn.net/Tony_long7483/article/details/126074205