7-1作业

1.实验目的：完成字符收发

led.h

#ifndef __GPIO_H__ 
#define __GPIO_H__
 
#include "stm32mp1xx_rcc.h"
#include "stm32mp1xx_gpio.h"
#include "stm32mp1xx_uart.h"
 
//RCC,GPIO,UART初始化
void init();
 
//字符数据发送
void set_tt(const char str);
 
//字符数据接收
char ret_tt();
 
//字符串数据发送
void seting_tt(const char* string);
 
//字符串数据接收
char reting_tt();
 
 
#endif                                            

led.c

 #include "led.h"
 
 //PB2,PG11,UART初始化
 void init()
 {
     //PB2,PG11,UART使能
     RCC-> MP_AHB4ENSETR |= (0X1<<1);
     RCC-> MP_AHB4ENSETR |= (0X1<<6);
     RCC-> MP_APB1ENSETR |= (0X1<<16);
 
     //PB2
     GPIOB->MODER |=(0X3<<4);
     GPIOB->MODER &=(~(0X1<<4));
 
     GPIOB->AFRL |=(0X15<<8);
     GPIOB->AFRL &=(~(0X7<<8));
 
     //PG11
     GPIOG->MODER |=(0X3<<22);
     GPIOG->MODER &=(~(0X1<<22));
 
     GPIOG->AFRH |=(0X15<<12);
     GPIOG->AFRH &=(~(0X9<<12));
 }
 
 //发送一个字符
 void set_tt(const char data)
 {
     //数据位
     USART4->CR1 &=(~(0X1<<12));
     USART4->CR1 &=(~(0X1<<28));
 
 
     USART4->CR1 &=(~(0X1<<10));
     USART4->CR1 &=(~(0X1<<15));
 
 
     //设置串口波特率
     USART4->BRR =0X22b;
 
     //设置停止位
     USART4->CR2 &=(~(0X3<<12));
 
     //使能USART 
     USART4->CR1 |=(0X1<<0);
 
     //设置发送位使能
     USART4->CR1 |=(0X1<<3);
 
     //发送数据
     if(USART4->ISR &(0X1<<7))
     {
         USART4->TDR=data;
         if(USART4->ISR &(0X1<<6))
         {
             return;
         }
     }                                                                                                                                            
 }
 
 //接受一个字符
 char ret_tt()
 {
     //数据位
     USART4->CR1 &=(~(0X1<<12));
     USART4->CR1 &=(~(0X1<<28));
 
     USART4->CR1 &=(~(0X1<<10));
     USART4->CR1 &=(~(0X1<<15));
 
 
     //设置串口波特率
     USART4->BRR =0X22b;
 
     //设置停止位
     USART4->CR2 &=(~(0X3<<12));
 
     //使能USART 
     USART4->CR1 |=(0X1<<0);
 
     //设置接受位使能
     USART4->CR1 |=(0X1<<2);
 
     //接受数据
     char data;
     while(1)
     {
         if(USART4->ISR &(0X1<<5))
         {
             data=USART4->RDR;
             return data;
         }
     }
     return 0;
 }

main.c

#include "led.h"
 
int main()
{
    char data;
    init();
    while(1)
    {
        data=ret_tt();
        set_tt(data);
    }
    return 0;
}                             

2.实验目的：完成字符串收发