「Verilog学习笔记」使用3-8译码器①实现逻辑函数

专栏前言

本专栏的内容主要是记录本人学习Verilog过程中的一些知识点，刷题网站用的是牛客网

`timescale 1ns/1ns
 
module decoder_38(
   input             E1_n   ,
   input             E2_n   ,
   input             E3     ,
   input             A0     ,
   input             A1     ,
   input             A2     ,
   
   output wire       Y0_n   ,  
   output wire       Y1_n   , 
   output wire       Y2_n   , 
   output wire       Y3_n   , 
   output wire       Y4_n   , 
   output wire       Y5_n   , 
   output wire       Y6_n   , 
   output wire       Y7_n   
);
wire E ;
assign E = E3 & ~E2_n & ~E1_n;
assign  Y0_n = ~(E & ~A2 & ~A1 & ~A0);
assign  Y1_n = ~(E & ~A2 & ~A1 &  A0);
assign  Y2_n = ~(E & ~A2 &  A1 & ~A0);
assign  Y3_n = ~(E & ~A2 &  A1 &  A0);
assign  Y4_n = ~(E &  A2 & ~A1 & ~A0);
assign  Y5_n = ~(E &  A2 & ~A1 &  A0);
assign  Y6_n = ~(E &  A2 &  A1 & ~A0);
assign  Y7_n = ~(E &  A2 &  A1 &  A0);
     
endmodule
 
module decoder0(
   input             A     ,
   input             B     ,
   input             C     ,
   
   output wire       L
);
    wire [7:0] Y ; 
 
    decoder_38 d(
        .E1_n(0 ), 
        .E2_n(0 ),
        .E3(1   ), 
        .A0(C   ),
        .A1(B   ),
        .A2(A   ),
        .Y0_n(Y[0]), 
        .Y1_n(Y[1]), 
        .Y2_n(Y[2]), 
        .Y3_n(Y[3]), 
        .Y4_n(Y[4]), 
        .Y5_n(Y[5]), 
        .Y6_n(Y[6]), 
        .Y7_n(Y[7])
    );
 
    assign L = ~(Y[1] & Y[3] & Y[6] & Y[7]) ; 
 
endmodule