A）文件系统在内存ramdisk中，initrd作为rootfs及外部根文件系统
setenv bootargs "initrd=30B00000,300000 console=ttySAC2,115200 root=/dev/ram0 rw init=/linuxrc "
setenv bootcmd "movi read kernel 30008000; movi read rootfs 30B00000 300000; bootm 30008000 30B00000"
启动过后
文件系统在内存中，添加文件重启后丢失
B）文件系统在mmcblk0p2（内部inand）
setenv bootargs"noinitrd console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3"
setenv bootcmd "movi read kernel 30008000; bootm 30008000 "
启动过后文件系统在mmcblk0p2中，添加文件重启保留
B）文件系统在mmcblk1p4（外部sdcard :/dev/sdb3），内核在mmcblk1p3(外部sd:/dev/sdb4)
myx210 # fdisk -c 1 （1 表示插槽一上的mmc2(x210有四的sd通道,mmc0为内部inand，mmc2，mmc3为外部sd卡，我的卡插在第一个插槽，也就是mmc2上))）
partion # size(MB) block start # block count partition_Id
1 256 20480 524288 0x83
2 120 544768 245760 0x83
3 100 790528 204800 0x83（可以烧录linux）
4 14697 995328 30100480 0x83（可以烧录rootfs）
---------------------------------------------------------------
ubuntu# sudo dd if=/tftp/zImage-qt of=/dev/sdb3 bs=1k count=20000 (20000块，相当于10M)
ubuntu#sudo dd if=/tftp/rootfs_qt4.ext3 of=/dev/sdb4 bs=1k count=512000 (512000 块，相当于256M)
------------------------------------------------------------------------------------------------------
之后可以配置开发板环境变量：
mmcblk1p4为mmc2的第四个分区也就是之前烧录的sdb4
myx210#setenv bootargs "noinitrd console=ttySAC2,115200 root=/dev/mmcblk1p4 rw init=/linuxrc rootfstype=ext3"
myx210# setenv bootcmd " mmc read 1 30008000 790528(分区3的开始柱面) 10000（读取的块size,大概5M）; bootm 30008000"
---------------------
输出（登录root/123456）：
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.7+ (rlk@rlk) (gcc version 4.4.1 (Sourcery G+ + Lite 2009q3-67) ) #3 PREEMPT Thu Oct 19 06:30:44 CST 2023
[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ca che
[ 0.000000] Machine: SMDKV210
[ 0.000000] @@@@@@@ atags_pointer not null
[ 0.000000] @@@@@@@linter#####boot_params:c0000100,mdesc->boot_params:4000000 2
[ 0.000000] Ignoring unrecognised tag 0x41001099
[ 0.000000] $cmdline:noinitrd console=ttySAC2,115200 root=/dev/mmcblk 1p4 rw init=/linuxrc rootfstype=ext3
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54 000000
[ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_onenand: source is hclk_psys (0), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 24000000
[ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 12000000
[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 12000000
[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000
[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000
[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk: source is sclk_a2m (0), rate is 100000000
[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 327816k/327816k available, 196472k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfc000000 ( 440 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
[ 0.000000] .text : 0xc0030000 - 0xc06d3000 (6796 kB)
[ 0.000000] .data : 0xc06d4000 - 0xc0720ba0 ( 307 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, No des=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:393
[ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[ 0.000000] mult[140737]
[ 0.000000] max_delta_ns[2937815369]
[ 0.000000] min_delta_ns[30517]
[ 0.000000] rate[32768]
[ 0.000000] HZ[256]
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC2] enabled
[ 0.506805] Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
[ 0.590951] pid_max: default: 32768 minimum: 301
[ 0.595599] Mount-cache hash table entries: 512
[ 0.600330] Initializing cgroup subsys debug
[ 0.604312] Initializing cgroup subsys cpuacct
[ 0.608723] Initializing cgroup subsys freezer
[ 0.613164] CPU: Testing write buffer coherency: ok
[ 0.619966] regulator: core version 0.5
[ 0.622457] NET: Registered protocol family 16
[ 0.632054] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.636853] pmstats at 00000000
[ 0.639979] Open OV2655 camema sensor
[ 0.777331] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 476 42857
[ 0.783438] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 476 42857
[ 0.790972] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 476 42857
[ 0.798510] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 476 42857
[ 0.806057] smdkv210_nand_io_init
[ 0.809715] S5PV210: Initializing architecture
[ 0.814055] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin =divclk, base 0
[ 0.822189] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin =divclk, base 8
[ 0.830589] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin =divclk, base 12
[ 0.839081] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin =divclk, base 16
[ 0.847690] regulator: pd_audio_supply: 5000 mV normal
[ 0.852852] regulator: pd_cam_supply: 5000 mV normal
[ 0.857862] regulator: pd_tv_supply: 5000 mV normal
[ 0.862796] regulator: pd_lcd_supply: 5000 mV normal
[ 0.867825] regulator: pd_g3d_supply: 5000 mV normal
[ 0.872848] regulator: pd_mfc_supply: 5000 mV normal
[ 0.883732] bio: create slab
[ 0.886826] SCSI subsystem initialized
[ 0.890117] usbcore: registered new interface driver usbfs
[ 0.895518] usbcore: registered new interface driver hub
[ 0.900834] usbcore: registered new device driver usb
[ 0.906167] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.911382] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.916689] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.922196] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.928599] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies In c.
[ 0.935726] cfg80211: Calling CRDA to update world regulatory domain
[ 0.942011] Switching to clocksource clock_source_systimer
[ 0.952367] NET: Registered protocol family 2
[ 0.955445] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.962901] TCP established hash table entries: 16384 (order: 5, 131072 bytes )
[ 0.969674] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.976408] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.982463] TCP reno registered
[ 0.985573] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.991495] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.997939] NET: Registered protocol family 1
[ 1.002375] RPC: Registered udp transport module.
[ 1.006817] RPC: Registered tcp transport module.
[ 1.011491] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.018055] PMU: registered new PMU device of type 0
[ 1.022881] wifi power management
[ 1.026370] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
[ 1.031809] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 1.037756] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 1.043864] smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0
[ 1.050366] S5PV210 ADC driver, (c) 2010 Samsung Electronics
[ 1.056155] cpuidle: phy_regs_save:0x4fd7c000
[ 1.060591] input: s3c-button as /devices/virtual/input/input0
[ 1.066099] s3c button Initialized!!
[ 1.069764] Loaded driver for PL330 DMAC-0 s3c-pl330
[ 1.074590] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[ 1.080718] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 1.085587] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.091730] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 1.096599] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.109504] ashmem: initialized
[ 1.111778] NTFS driver 2.1.29 [Flags: R/W].
[ 1.115460] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.122470] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.126661] msgmni has been set to 640
[ 1.132882] alg: No test for stdrng (krng)
[ 1.135565] io scheduler noop registered
[ 1.139436] io scheduler deadline registered
[ 1.143665] io scheduler cfq registered (default)
[ 1.148981] s3cfb s3cfb: [fb2] dma: 0x475ab000, cpu: 0xe1000000, size: 0x004b 0000
[ 1.159779] FIMD src sclk = 166750000
[ 1.161979] s3cfb s3cfb: registered successfully
[ 1.166578] Start display and show logo
[ 1.271114] x210 led driver
[ 1.338806] PA FB = 0x475AB000, bits per pixel = 32
[ 1.342240] screen width=1024 height=600 va=0xd75ab000 pa=0x475ab000
[ 1.348551] xres_virtual = 1024, yres_virtual = 1200, xoffset = 0, yoffset = 0
[ 1.355741] fb_size=4915200
[ 1.358512] Back frameBuffer[0].VAddr=d7803000 PAddr=47803000 size=2457600
[ 1.365684] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[ 1.373823] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[ 1.381894] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[ 1.390012] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[ 1.402297] brd: module loaded
[ 1.406089] loop: module loaded
[ 1.407805] pmem_gpu1: 1 init
[ 1.411126] Android kernel panic handler initialized (bind=kpanic)
[ 1.417341] S3C NAND Driver, (c) 2008 Samsung Electronics
[ 1.422349] Unknown NAND Device.
[ 1.425517] PPP generic driver version 2.4.2
[ 1.429887] PPP Deflate Compression module registered
[ 1.434726] PPP BSD Compression module registered
[ 1.440125] PPP MPPE Compression module registered
[ 1.444173] NET: Registered protocol family 24
[ 1.450198] dm9000 Ethernet Driver, V1.31
[ 1.454054] eth0: dm9000c at e08f4300,e08f8304 IRQ 42 MAC: 00:09:c0:ff:ec:48 (platform data)
[ 1.461227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.467781] s5p-ehci s5p-ehci: s5pv210 EHCI
[ 1.471827] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.478910] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[ 1.494263] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.498260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.504958] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.512147] usb usb1: Product: s5pv210 EHCI
[ 1.516300] usb usb1: Manufacturer: Linux 2.6.35.7+ ehci_hcd
[ 1.521938] usb usb1: SerialNumber: s5pv210
[ 1.526528] hub 1-0:1.0: USB hub found
[ 1.529846] hub 1-0:1.0: 1 port detected
[ 1.533904] Initializing USB Mass Storage driver...
[ 1.538670] usbcore: registered new interface driver usb-storage
[ 1.544557] USB Mass Storage support registered.
[ 1.549401] mice: PS/2 mouse device common for all mice
[ 1.554666] S5P Touchscreen driver, (c) 2008 Samsung Electronics
[ 1.560424] s3c-ts s3c-ts: Created Median filter len:5 coords:2 dec_threshold :6
[ 1.567616] s3c-ts s3c-ts: Created Mean filter len:3 coords:2
[ 1.573363] s3c-ts s3c-ts: Created Linear filter coords:2
[ 1.578709] s3c-ts s3c-ts: Created zoom filter coords:2
[ 1.583904] s3c-ts s3c-ts: 4 filter(s) initialized
[ 1.588692] S5P TouchScreen got loaded successfully : 12 bits
[ 1.594540] input: S5P TouchScreen as /devices/virtual/input/input1
[ 1.601126] using rtc device, s3c, for alarms
[ 1.604913] i2c /dev entries driver
[ 1.608869] Linux video capture interface: v2.00
[ 1.613086] gspca: main v2.9.0 registered
[ 1.617132] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
[ 1.623211] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[ 1.623217]
[ 1.631765] S3C JPEG Driver, (c) 2007 Samsung Electronics
[ 1.636764] JPEG driver for S5PV210
[ 1.640822] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[ 1.646682] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
[ 1.652476] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
[ 1.658443] usbcore: registered new interface driver uvcvideo
[ 1.663629] USB Video Class driver (v0.1.0)
[ 1.669731] device-mapper: uevent: version 1.0.3
[ 1.675839] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-d evel@redhat.com
[ 1.682902] cpuidle: using governor ladder
[ 1.686952] cpuidle: using governor menu
[ 1.690824] sdhci: Secure Digital Host Controller Interface driver
[ 1.696929] sdhci: Copyright(c) Pierre Ossman
[ 1.701373] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[ 1.707867] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
[ 1.714454] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[ 1.721360] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 1.728264] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[ 1.734817] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
[ 1.741403] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[ 1.818518] wifi power enabled
[ 1.820186] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 1.827185] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[ 1.833721] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
[ 1.840313] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[ 1.847173] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 1.854130] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[ 1.860671] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
[ 1.867266] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[ 1.874129] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[ 1.881635] usbcore: registered new interface driver hiddev
[ 1.886646] usbcore: registered new interface driver usbhid
[ 1.892121] usbhid: USB HID core driver
[ 1.896338] logger: created 64K log 'log_main'
[ 1.900506] logger: created 256K log 'log_events'
[ 1.905140] logger: created 64K log 'log_radio'
[ 1.909644] logger: created 64K log 'log_system'
[ 1.916274] No device for DAI WM8976 HiFi
[ 1.918829] s3c64xx_iis_dai_init:s3c64xx-i2s0
[ 1.923372] s3c64xx_iis_dev_probe:id0 !!!
[ 1.927244] s3c64xx_iis_dai_init:s3c64xx-i2s1
[ 1.931931] WM8976 Audio Codec 0.4wm8976_probe: i2c_master_send
[ 1.937677] wm8976_init
[ 1.993009] mmc0: new high speed MMC card at address 0001
[ 1.996954] usb 1-1: new high speed USB device using s5p-ehci and address 2
[ 2.004091] mmcblk0: mmc0:0001 004GE0 3.68 GiB
[ 2.008662] mmcblk0: p1 p2 p3 p4
[ 2.140261] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.145501] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.152604] usb 1-1: Product: USB2.0 Hub
[ 2.157240] hub 1-1:1.0: USB hub found
[ 2.160513] hub 1-1:1.0: 4 ports detected
[ 2.534463] mmc2: new high speed SDHC card at address aaaa
[ 2.538669] mmcblk1: mmc2:aaaa SS16G 14.8 GiB
[ 2.543104] mmcblk1: p1 p2 p3 p4
[ 2.714754] s3c_idma_preallocate_buffer: VA-e0940000 PA-C0000000 163840byt es
[ 2.720984] s3c_preallocate_dma_buffer: VA-ff007000, PA-4FF40000, 131072bytes
[ 2.727696] asoc: WM8976 HiFi <-> s3c64xx-i2s0 mapping ok
[ 2.736357] ALSA device list:
[ 2.737867] #0: smdkc1000 (WM8976)
[ 2.741442] GACT probability NOT on
[ 2.744884] Mirror/redirect action on
[ 2.748521] u32 classifier
[ 2.751186] Actions configured
[ 2.754582] Netfilter messages via NETLINK v0.30.
[ 2.759320] nf_conntrack version 0.5.0 (5122 buckets, 20488 max)
[ 2.765394] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 2.772617] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 2.780496] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 2.787344] ctnetlink v0.93: registering with nfnetlink.
[ 2.792043] xt_time: kernel timezone is -0000
[ 2.798553] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.802489] arp_tables: (C) 2002 David S. Miller
[ 2.807053] TCP cubic registered
[ 2.810206] NET: Registered protocol family 10
[ 2.816698] lo: Disabled Privacy Extensions
[ 2.824676] Mobile IPv6
[ 2.825644] IPv6 over IPv4 tunneling driver
[ 2.831474] sit0: Disabled Privacy Extensions
[ 2.837423] ip6tnl0: Disabled Privacy Extensions
[ 2.842090] NET: Registered protocol family 17
[ 2.845070] NET: Registered protocol family 15
[ 2.849531] lib80211: common routines for IEEE802.11 drivers
[ 2.855189] ThumbEE CPU extension supported.
[ 2.859466] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 2.867541] regulator_init_complete: disabling pd_mfc_supply
[ 2.872638] regulator_init_complete: disabling pd_tv_supply
[ 2.878171] regulator_init_complete: disabling pd_cam_supply
[ 2.883839] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 2.889798] smdkc110-rtc smdkc110-rtc: setting system clock to 2010-01-01 12: 00:02 UTC (1262347202)
[ 2.900260] FIMC0 registered successfully
[ 2.904078] FIMC1 registered successfully
[ 2.908056] FIMC2 registered successfully
[ 2.910835] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[ 2.917618] s5p-tvout s5p-tvout: hpd status is cable removed
[ 2.928546] DBUG_PORT must not use AFC!
[ 3.028918] EXT4-fs (mmcblk1p4): recovery complete
[ 3.033375] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. O pts: (null)
[ 3.040314] VFS: Mounted root (ext3 filesystem) on device 179:12.
[ 3.046407] Freeing init memory: 160K
[ 3.196180] EXT4-fs (mmcblk1p4): re-mounted. Opts: barrier=1,nodelalloc,data= ordered
Starting logging: OK
Starting mdev...
Initializing random number generator... done.
Starting network...
[ 4.189568] eth0: link down
[ 4.191065] ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.21.0) started
Sending discover...
[ 5.877055] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 5.881546] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 192.168.0.50...
Lease of 192.168.0.50 obtained, lease time 20
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.0.1
Starting sshd: OK
Starting qttest...
[ 7.590564] EXT2-fs (mmcblk0p4): error: couldn't mount because of unsupported optional features (4)
[ 7.614527] EXT4-fs (mmcblk0p4): warning: mounting unchecked fs, running e2fs ck is recommended
[ 7.623453] EXT4-fs (mmcblk0p4): recovery complete
[ 7.626859] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. O pts: (null)
hdmi_x210 start
connect::m_flagHWConnected() fail
=============== HDMI Audio =============
========= HDMI Mode & Color Space =======
= 1. HDMI(YCbCr) =
= 2. HDMI(RGB) =
=========== x210 HDMI Rseolution ========
= 4. 480P_60_16_9 (0x04000000) =
= 5. 480P_60_4_3 (0x05000000) =
= 6. 576P_50_16_9 (0x06000000) =
= 7. 576P_50_4_3 (0x07000000) =
= 8. 720P_60 (0x08000000) =
= 9. 720P_50 (0x09000000) =
= a. 1080P_60 (0x0a000000) =
= b. 1080P_50 (0x0b000000) =
= c. 1080I_60 (0x0c000000) =
= d. 1080I_50 (0x0d000000) =
= i. 1080P_30 (0x12000000) =
=========================================
Welcome to Buildroot
x210v3 login: Error opening mouse device '/dev/input/mouse2': No such file or di rectory
QWSTslibMouseHandlerPrivate: ts_open() failed with error: 'No such device'
Please check your tslib installation!
Welcome to Buildroot
x210v3 login: root
Password: