RationalDMIS 2022位置度评价，轮廓度评价时， 元素理论值变了，如何一劳永逸解决！

1，几何尺寸和公差符号

2.通用尺寸公差符号


3.位置度（Position）

位置度的被测要素有点、直线和平面，基准要素主要有直线和平面。给定位置度的被测要素相对于基准要素必须保持图样给定的正确位置关系，被测要素相对于基准要素的正确位置关系应由基准要素和理论正确尺寸来确定。

位置度（Position）用来定义一个FOS在基准系的位置，它以真实位置（Trueposition）为中心，定义一个公差带，被控制形体的轴心线或中心面，必须在公差带内真实位置（Trueposition）是由基本尺寸标注的FOS，在基准系的理论精确（theoreticalexact）位置。

4.轮廊度（Profile）

轮廓度（Profile）是一个零件形体在指定平面的外形轮廊。

一个真实轮廊（TrueProfile）是由基本尺寸标注的精确零件形体轮。

轮廊度是沿着真实轮廊均匀分布的几何公差，所有表面元素必须在公差带内。一个轮廊度必须应用到真实轮廊。轮廊度不带基准控制尺寸和形状，轮廊度带基准控制尺寸、形状、位置、方向。

综上所述，无论位置度评价，轮廊度评价，基准和被测元素理论值（名义值），都需要保持相对不变

6.RationaIDMIS2022位置度评价，轮廓度评价时，元素理论值变了，如何解决！

如何在公差评价前，自动重新定义理论值呢？

对于RationalDMIS软件，最好用DMIS语句控制程序，不建议用界面控制。

以下有2种方法

$$/*  Header
DMISMN/'Created by [山涧果子] on 星期五, 四月 22, 2022', 4.0
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, 15.0000
RECALL/D(MCS)
SNSLCT/S(10-D0.5L20)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, DEFALT
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/MAN
F(PLN1)=FEAT/PLANE,CART,-32.8182,3.8780,29.0377,0.0000,0.0000,1.0000
$$ Measurement points are created through actual points
MEAS/PLANE, F(PLN1), 3
  PTMEAS/CART, -48.1588, 2.4992, 29.0377, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, -47.7382, 5.4880, 29.0377, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  -2.5577, 3.6469, 29.0377, 0.0000, 0.0000, 1.0000
ENDMES
D(CRD1) = DATSET/FA(PLN1), ZDIR
F(LN1)=FEAT/LINE,BND,CART,-49.5977,7.0001,27.9058,-13.0122,7.0001,27.4539,-0.0000,1.0000,0.0000
$$ Measurement points are created through actual points
MEAS/LINE, F(LN1), 2
  PTMEAS/CART, -49.5977, 7.0001, 27.9058, -0.0000, 1.0000, 0.0000
  PTMEAS/CART, -13.0122, 7.0001, 27.4539, -0.0000, 1.0000, 0.0000
ENDMES
F(PT1)=FEAT/POINT,CART,-51.2084,3.8215,28.1728,-1.0000,0.0000,0.0000
MEAS/POINT, F(PT1), 1
  PTMEAS/CART, -51.2084,3.8215,28.1728,-1.0000,0.0000,0.0000
ENDMES
D(CRD2) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN1), XDIR, YORIG, FA(PT1), XORIG
D(CRD2) = TRANS/ZORIG, -29.0377, YORIG, -7.0001, XORIG, 51.2084
$$ Set.CAD2PCS.CADM_1
MODE/PROG,MAN
F(PLN2)=FEAT/PLANE,CART,-69.8145,7.3865,-5.5623,-0.0021,1.0000,0.0047
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$ MACRO: EASI_CLEARPLN_GOTO
$$ FUNCTION: CLEARANCE SURFACE IMPLEMENTATION
$$      Move machine CLEAR SURFACE DIST above the current clear surface 
$$		plane and then move machine parallel to the clear surface plane 
$$ 		ALL Macro parameters are in PCS and Current UNITS
$$ 		Last update: 3-1-04 Add mode checking. only works in PROG MODE
$$ 		Last update: 8-24-04 Clear position is based on the surface of
$$	
$$ This sample DMIS Macro is provided by External-Array Software, Inc.
$$ It should be modified for your own use. There is no guarantee for
$$ the quality of this Macro. November, 2003

M(EASI_CLEARPLN_GOTO) = MACRO/ISNOM, TARX, TARY, TARZ
	DECL/LOCAL, REAL, CCX, CCY, CCZ, CCI, CCJ, CCK
	DECL/LOCAL, REAL, CURX, CURY, CURZ, TD, CLRDIST, SDIAM
	DECL/LOCAL, CHAR, 255, CLRLABEL, FLABEL, MMODE, SNAME

	MMODE = VALUE/MODE
	CLRLABEL = VALUE/SNSET, CLRSRF
	
	IF/ ( (LEN(CLRLABEL) .GT. 0) .AND. (MMODE .EQ. 'PROG,MAN') )
		CLRDIST = VALUE/SNSET, CLRSRF, DIST
		FLABEL = ASSIGN/'FA'
		IF/ ISNOM .EQ. 0
			FLABEL = ASSIGN/'F'
		ENDIF
			
		CCX = OBTAIN/FLABEL(@CLRLABEL), 3
		CCY = OBTAIN/FLABEL(@CLRLABEL), 4
		CCZ = OBTAIN/FLABEL(@CLRLABEL), 5
		CCI = OBTAIN/FLABEL(@CLRLABEL), 6
		CCJ = OBTAIN/FLABEL(@CLRLABEL), 7
		CCK = OBTAIN/FLABEL(@CLRLABEL), 8
		
		SNAME = VALUE/SNSLCT
		SDIAM = OBTAIN/SS(SNAME), 8
		CCX = ASSIGN/CCX + CCI * SDIAM/2
		CCY = ASSIGN/CCY + CCJ * SDIAM/2
		CCZ = ASSIGN/CCZ + CCK * SDIAM/2

		CURX = VALUE/GOTOM, XAXIS
		CURY = VALUE/GOTOM, YAXIS
		CURZ = VALUE/GOTOM, ZAXIS
		
		TD = ASSIGN/(CURX - CCX) * CCI + (CURY - CCY) * CCJ + (CURZ - CCZ) * CCK
		IF/ TD .LT. CLRDIST
			TD = ASSIGN/(CLRDIST - TD)
			GOTO/CURX+CCI*TD, CURY+CCJ*TD, CURZ+CCK*TD
		ENDIF
		
		TD = ASSIGN/(TARX - CCX) * CCI + (TARY - CCY) * CCJ + (TARZ - CCZ) * CCK
		IF/ TD .LT. CLRDIST
			TD = ASSIGN/(CLRDIST - TD)
			GOTO/TARX+CCI*TD, TARY+CCJ*TD, TARZ+CCK*TD
		ENDIF
	ENDIF
	
ENDMAC
SNSET/APPRCH, 2
SNSET/RETRCT, 2
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, FA(PLN1), 30

F(PLN6)=FEAT/PLANE,CART,57.9442,3.4067,29.0376,0.0000,-0.0000,1.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -52.4495, 37.2412, 26.8501
MEAS/PLANE,F(PLN6),4,CLRSRF,FA(PLN1),30.0000,CLRSRF,FA(PLN1),30.0000
  PTMEAS/CART, -48.8457,  5.3475, 29.0377, -0.0000, 0.0000, 1.0000
  PTMEAS/CART, -49.2015,  1.6212, 29.0377, -0.0000, 0.0000, 1.0000
  PTMEAS/CART, 162.5019,  1.6163, 29.0377, -0.0000, 0.0000, 1.0000
  PTMEAS/CART, 167.3219,  5.0417, 29.0377, -0.0000, 0.0000, 1.0000
ENDMES
D(CRD8) = DATSET/FA(PLN6), ZDIR
F(LN3)=FEAT/LINE,BND,CART,-48.8523,7.0001,26.0000,167.1282,7.0001,26.0000,-0.0000,1.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 167.3219, 5.0417, 59.2789
MEAS/LINE, F(LN3), 2
  GOTO/CART,   167.3219, 5.0417, 59.2789
  GOTO/CART,   -48.8523, 8.2412, 59.2789
  PTMEAS/CART, -48.8523, 7.0001, 26.0000, 0.0000, 1.0000, 0.0000
  PTMEAS/CART, 167.1282, 7.0001, 26.0000, 0.0000, 1.0000, 0.0000
ENDMES
F(点T12)=FEAT/POINT,CART,-51.2084,4.6031,26.0000,-1.0000,-0.0000,0.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -52.4496, 4.6031, 26.0000
MEAS/POINT, F(点T12), 1
  GOTO/CART, -52.4496,2.3797,59.2789
  GOTO/CART, -52.4496,4.6031,59.2789
  PTMEAS/CART, -51.2084,4.6031,26.0000,-1.0000,-0.0000,0.0000
ENDMES
D(CRD9) = DATSET/FA(PLN6), ZDIR, ZORIG, FA(LN3), XDIR, YORIG, FA(点T12), XORIG
D(CRD9) = TRANS/ZORIG, -29.0377, YORIG, -7.0001, XORIG, 51.2084

$$ Set.CAD2PCS.CADM_1



(L1)

$$ DCC测量开始！！！$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$


MODE/PROG,MAN


FEDRAT/MESVEL, MMPS, 1.0000
FEDRAT/POSVEL, MMPS, 180.0000
FEDRAT/SCNVEL, MMPS, 20.0000
ACLRAT/MESACL, MMPSS, 3.0000
ACLRAT/POSACL, MMPSS, 200.0000
ACLRAT/SCNACL, MMPSS, 150.0000
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$
$$$$  换从此行运行  $$$$$$$$
$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$


  DECL/COMMON, INTGR, KNPTN1,VAR2
  VAR2 = PROMPT/'请输入循环次数'
  DO/KNPTN1,1,VAR2
  
  $$请插入要循环的内容


RECALL/D(CRD9)

D(TRA1) = TRANS/XORIG, 75*(KNPTN1-1)


GOTO/-52.4465, 3.8215, 128.1728

SNSLCT/S(10-D0.5L20_A90_B0)

F(PLN3)=FEAT/PLANE,CART,-15.2949,0.0000,-6.8427,0.0000,1.0000,0.0000
$$ Measurement points are created through actual points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -3.2514, 1.4764, -1.7307
MEAS/PLANE,F(PLN3),3,CLRSRF,F(PLN2),12.0000,CLRSRF,F(PLN2),12.0000
  PTMEAS/CART,  -3.2514, 0.0000,  -1.7307, 0.0000, 1.0000, 0.0000
  PTMEAS/CART, -20.0462, 0.0000,  -2.8900, 0.0000, 1.0000, 0.0000
  PTMEAS/CART, -22.5873, 0.0000, -15.9076, 0.0000, 1.0000, 0.0000
ENDMES
D(CRD3) = DATSET/FA(PLN3), YDIR, YORIG
D(CRD3) = TRANS/YORIG, -0
SNSET/APPRCH, 0.4
SNSET/RETRCT, 0.4
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, F(PLN2), 30.0000
F(LN2)=FEAT/LINE,BND,CART,-0.0000,-0.6000,-5.7337,-0.0000,-0.6000,5.4630,1.0000,-0.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -22.6027, 37.2367, -15.9094
MEAS/LINE,F(LN2),2,CLRSRF,F(PLN2),12.0000,CLRSRF,F(PLN2),12.0000
  GOTO/CART,   -22.6027, 37.2367, -15.9094
  GOTO/CART,     0.7369, 37.2380,  -5.7355
  PTMEAS/CART,   0.0000, -0.6000,  -5.7336, 1.0000, -0.0000, -0.0000
  PTMEAS/CART,   0.0000, -0.6000,   5.4631, 1.0000, -0.0000, -0.0000
ENDMES
F(PT2)=FEAT/POINT,CART,-16.2203,-0.9753,0.0000,-0.0000,0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -16.2203, -0.9752, 0.6382
MEAS/POINT,F(PT2),1,CLRSRF,F(PLN2),12.0000,CLRSRF,F(PLN2),12.0000
  GOTO/CART, -16.2216,37.2377,0.6363
  PTMEAS/CART, -16.2203,-0.9753,0.0000,-0.0000,0.0000,1.0000
ENDMES
D(CRD4) = DATSET/FA(PLN3), YDIR, YORIG, FA(LN2), ZDIR, XORIG, FA(PT2), ZORIG
D(CRD4) = TRANS/YORIG, -0, XORIG, -0, ZORIG, -0

MODE/PROG,MAN
F(PLN4)=FEAT/PLANE,CART,-13.7079,0.0000,0.9635,-0.0000,1.0000,-0.0000
SNSET/APPRCH, 1.0000
SNSET/RETRCT, 1.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, F(PLN4), 12
F(点A1) = FEAT/POINT,CART, -0.7,-0.05,7.23, -0.0000023,1,0
F(点A2) = FEAT/POINT,CART, -10.32,-0.05,7.23, -0.0000023,1,0
F(点A3) = FEAT/POINT,CART, -0.7,-0.05,2.57, -0.0000023,1,0
F(点A4) = FEAT/POINT,CART, -10.32,0,2.57, -0.0000023,1,0
F(点A5) = FEAT/POINT,CART, -0.7,-0.05,-3.69, -0.0000023,1,0
F(点A6) = FEAT/POINT,CART, -5.65,0,-3.69, -0.0000023,1,0
F(点A7) = FEAT/POINT,CART, -10.32,0,-1.5, -0.0000023,1,0
F(点A12) = FEAT/POINT,CART, -18.01,0,-2.03, -0.0000023,1,0
F(点A11) = FEAT/POINT,CART, -13.13,0,-4.93, -0.0000023,1,0
F(点A18) = FEAT/POINT,CART, -10.22,0,-9.81, -0.0000023,1,0
F(点A13) = FEAT/POINT,CART, -22.89,0,-4.93, -0.0000023,1,0
F(点A8) = FEAT/POINT,CART, -25.92,0,-1.5, -0.0000023,1,0
F(点A14) = FEAT/POINT,CART, -25.8,0,-9.81, -0.0000023,1,0
F(点A17) = FEAT/POINT,CART, -13.13,0,-14.69, -0.0000023,1,0
F(点A15) = FEAT/POINT,CART, -22.89,0,-14.69, -0.0000023,1,0
F(点A16) = FEAT/POINT,CART, -18.01,0,-17.6, -0.0000023,1,0
F(点A10) = FEAT/POINT,CART, -25.92,0,-17.96, -0.0000023,1,0
F(点A9) = FEAT/POINT,CART, -10.11,0,-17.96, -0.0000023,1,0
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -0.7000, 0.5882, 7.2300
MEAS/POINT, F(点A1), 1
  GOTO/CART, -0.7000,12.2382,7.2300
  PTMEAS/CART, -0.7000,-0.0500,7.2300,-0.0000,1.0000,0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -10.3200, 0.5882, 7.2300
MEAS/POINT, F(点A2), 1
  GOTO/CART, -10.3200,12.2382,7.2300
  PTMEAS/CART, -10.3200,-0.0500,7.2300,-0.0000,1.0000,0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -0.7000, 0.5882, 2.5700
MEAS/POINT, F(点A3), 1
  GOTO/CART, -0.7000,12.2382,2.5700
  PTMEAS/CART, -0.7000,-0.0500,2.5700,-0.0000,1.0000,0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -10.3200, 0.6382, 2.5700
MEAS/POINT, F(点A4), 1
  GOTO/CART, -10.3200,12.2382,2.5700
  PTMEAS/CART, -10.3200,0.0000,2.5700,-0.0000,1.0000,0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -0.7000, 0.5882, -3.6900
MEAS/POINT, F(点A5), 1
  GOTO/CART, -0.7000,12.2382,-3.6900
  PTMEAS/CART, -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265