LED灯的基本控制

题目要求

首先让8路LED指示灯闪烁3遍然后熄灭，接着依次点亮LED指示灯，最后依次熄灭LED灯，程序循环实现上述功能。

分析设计

原理图：


首先应该选通Y4C，也就是ABC = 100。

代码

#include 
#define uchar unsigned char 
#define uint unsigned int
	
void HC138(uchar channel)
{
	switch (channel)
	{
		case 4:
			P2 = (P2 & 0x1f) | 0x80;
		break;
		case 5:
			P2 = (P2 & 0x1f) | 0xa0;
		break;
		case 6:
			P2 = (P2 & 0x1f) | 0xc0;
		break;
		case 7:
			P2 = (P2 & 0x1f) | 0xe0;
		break;
	}
}

void Delay(uint t) 
{
	while (t -- ) ;
	while (t -- ) ;
}

void LED_3()
{
	int i;
	for (i = 0; i < 3; i ++ )
	{
		P0 = 0x00;
		Delay(60000);
		Delay(60000);
		P0 = 0xff;
		Delay(60000);
		Delay(60000);
	}
}

void LED() 
{
	int i;
	LED_3();
	
	for (i = 0; i < 8; i ++ ) 
	{
		P0 = 0xfe << i;
		Delay(60000);
		Delay(60000);
	}
	
	for (i = 0; i < 8; i ++ )
	{
		P0 |= 0x01 << i;
		Delay(60000);
		Delay(60000);
	}
}

void main()
{
	HC138(4);
	while(1)
	{
		LED();
	}
}
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71