• Packet Tracer - 配置多区域 OSPFv3


    地址分配表

    设备

    接口

    IPv6 地址

    OSPF 区域

    RA

    G0/0

    2001:DB8:1:A1::1/64

    1

    G0/1

    2001:DB8:1:A2::1/64

    1

    S0/0/0

    2001:DB8:1:AB::2/64

    0

    本地链路

    FE80::A

    不适用

    RB

    G0/0

    2001:DB8:1:B1::1/64

    0

    S0/0/0

    2001:DB8:1:AB::1/64

    0

    S0/0/1

    2001:DB8:1:BC::1/64

    0

    本地链路

    FE80::B

    不适用

    RC

    G0/0

    2001:DB8:1:C1::1/64

    2

    G0/1

    2001:DB8:1:C2::1/64

    2

    S0/0/1

    2001:DB8:1:BC::2/64

    0

    本地链路

    FE80::C

    不适用

    拓扑图

    目标

    第 1 部分:配置 OSPFv3

    第 2 部分:验证多区域 OSPFv3 操作

    背景信息

    在本练习中,您将配置多区域 OSPFv3。 网络已经连接而且接口上配置了 IPv6 编址。 您的任务是启用多区域 OSPFv3,验证连接并检查多区域 OSPFv3 的操作。

    第 1 部分:    配置 OSPFv3

    第 1 步:    在 RA 上启用 IPv6 路由并配置 OSPFv3。

    a.     启用 IPv6 路由。

    b.    使用进程 ID 1 和路由器 ID 1.1.1.1 配置 RA 上的 OSPFv3。

    第 2 步:    通告 RA 上 OSPFv3 中的每个直连网络。

    为每个活动 IPv6 接口配置 OSPFv3,将各个接口分配给地址分配表中所列出的区域。

    第 3 步:    在 RB 和 RC 上配置 OSPFv3

    对 RB 和 RC 重复执行第 1 步和第 2 步,将路由器 ID 分别更改为 2.2.2.2 和 3.3.3.3。

    第 2 部分:    验证多区域 OSPFv3 操作

    第 1 步:    验证与每个 OSPFv3 区域的连接。

    在 RA 中,对区域 0 和区域 2 中的下列每台远程设备执行 ping 操作:2001:DB8:1:B1::2、2001:DB8:1:A1::2、2001:DB8:1:A2::2、2001:DB8:1:C1::2 和 2001:DB8:1:C2::2。

    第 2 步:    使用 show 命令检查当前 OSPFv3 的操作。

    使用以下命令来收集有关您的 OSPFv3 多区域实施的信息。

    show ipv6 ospf

    show ipv6 route

    show ipv6 ospf database

    show ipv6 ospf interface

    show ipv6 ospf neighbor

    注:show ipv6 protocols 的 Packet Tracer 输出当前与 IOS 15 输出不一致。 请参阅实际设备实验,了解正确的 show 命令输出。

    实验详细步骤:

    RA>enable

    RA#conf t

    Enter configuration commands, one per line. End with CNTL/Z.

    RA(config)#ipv6 unicast-routing

    RA(config)#ipv6 router ospf 1

    RA(config-rtr)#router-id 1.1.1.1

    RA(config-rtr)#int g0/0

    RA(config-if)#ipv6 ospf 1 area 1

    RA(config-if)#int g0/1

    RA(config-if)#ipv6 ospf 1 area 1

    RA(config-if)#int s0/0/0

    RA(config-if)#ipv6 ospf 1 area 0

    RB>enable

    RB#conf t

    Enter configuration commands, one per line. End with CNTL/Z.

    RB(config)#ipv6 unicast-routing

    RB(config)#ipv6 router ospf 1

    RB(config-rtr)#router-id 2.2.2.2

    RB(config-rtr)#int g0/0

    RB(config-if)#ipv6 ospf 1 area 0

    RB(config-if)#int s0/0/0

    RB(config-if)#ipv6 ospf 1 area 0

    RB(config-if)#int s0/0/1

    RB(config-if)#ipv6 ospf 1 area 0

    RC>enable

    RC#conf t

    Enter configuration commands, one per line. End with CNTL/Z.

    RC(config)#ipv6 unicast-routing

    RC(config)#ipv6 router ospf 1

    RC(config-rtr)#router-id 3.3.3.3

    RC(config-rtr)#int g0/0

    RC(config-if)#ipv6 ospf 1 area 2

    RC(config-if)#int g0/1

    RC(config-if)#ipv6 ospf 1 area 2

    RC(config-if)#int s0/0/1

    RC(config-if)#ipv6 ospf 1 area 0

    实验链接:https://pan.baidu.com/s/1cfOuAK-B3_sBBXYGnBYYog?pwd=9227

    提取码:9227

    --来自百度网盘超级会员V1的分享

  • 相关阅读:
    加密货币出现反弹的迹象,牛市即将回归?
    CentOS 6.5安装配置LNMP服务器(Nginx+PHP+MySQL)
    tar解压出错:gzip: stdin: unexpected end of file的解决
    利用两个小demo理解汇编代码排查内存溢出问题
    机器学习之遗传算法
    docker部署oracle 19c
    Android之 SVG绘制
    小程序学习
    5.2 Ajax 数据爬取实战
    macOS Sonoma 14.1beta3(23B5067a)发布
  • 原文地址:https://blog.csdn.net/m0_63624418/article/details/127863009