• 华为三层交换机之基本操作

    华为三层交换机之基本操作

    一、华为三层交换机s5700系列

    在这里插入图片描述

    二、实验测试拓扑

    在这里插入图片描述

    三、创建管理IP

    1.进入特权模式

    <Huawei>system-view 
Enter system view, return user view with Ctrl+Z.

    • 1
    • 2

    2.关闭信息中心消息提示

    [Huawei]undo info-center enable
Info: Information center is disabled.

    • 1
    • 2

    3.创建交换机管理VLAN

    [Huawei]vlan 200
[Huawei-vlan200]

    • 1
    • 2

    4.配置管理IP地址

    [Huawei]vlan 200
[Huawei-vlan200]management-vlan 
[Huawei-vlan200]quit
[Huawei]interface Vlanif  200
[Huawei-Vlanif200]ip address 192.168.200.254 24
[Huawei-Vlanif200]quit
[Huawei]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7

    5.将管理接口加入到管理VLAN

    [Huawei]interface GigabitEthernet 0/0/24
[Huawei-GigabitEthernet0/0/24]port link-type trunk 	
[Huawei-GigabitEthernet0/0/24]port trunk allow-pass vlan 200
[Huawei-GigabitEthernet0/0/24]quit
[Huawei]

    • 1
    • 2
    • 3
    • 4
    • 5

    四、配置telnet

    1.配置telnet

    [Huawei]telnet server enable     #//Telnet出厂时是关闭的，需要开启
Info: The Telnet server has been enabled.
[Huawei]user-interface vty 0 4   #//Telnet常用于设备管理员登录，推荐使用AAA认证
[Huawei-ui-vty0-4]protocol inbound telnet 
[Huawei-ui-vty0-4]authentication-mode aaa    
[Huawei-ui-vty0-4]idle-timeout  15
[Huawei-ui-vty0-4]quit
[Huawei]aaa
[Huawei-aaa]local-user admin password cipher admin	   #  //配置管理员Telnet登录交换机的用户名和密码。用户名不区分大小写，密码区分大小写
[Huawei-aaa]local-user admin privilege level 15	   #//将管理员的账号权限设置为15（最高）
[Huawei-aaa]local-user admin service-type telnet 
[Huawei-aaa]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12

    2.测试登录telnet

    <Huawei>tel	
<Huawei>telnet 192.168.200.254
Trying 192.168.200.254 ...
Press CTRL+K to abort
Connected to 192.168.200.254 ...


Login authentication


Username:admin
Password:
Info: The max number of VTY users is 5, and the number
      of current VTY users on line is 1.
      The current login time is 2022-08-19 00:50:57.
<Huawei>

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16

    五、配置端口IP和vlan

    1.配置VLAN及ip

    配置业务vlan10、vlan20、vlan30

    [Huawei]vlan batch 10 20 30
Info: This operation may take a few seconds. Please wait for a moment...done.	
[Huawei]interface Vlanif 10
[Huawei-Vlanif10]ip address 192.168.10.1 24
[Huawei-Vlanif10]quit		
[Huawei]interface Vlanif 20
[Huawei-Vlanif20]ip address 192.168.20.1 24
[Huawei-Vlanif20]quit
[Huawei]interface Vlanif 30
[Huawei-Vlanif30]ip address 192.168.30.1 24
[Huawei-Vlanif30]quit

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11

    2.将端口加入到vlan

    [Huawei]port-group 1		
[Huawei-port-group-1]group-member GigabitEthernet 0/0/1 to GigabitEthernet 0/0/5
[Huawei-port-group-1]port link-type trunk 
[Huawei-GigabitEthernet0/0/1]port link-type trunk 
[Huawei-GigabitEthernet0/0/2]port link-type trunk 
[Huawei-GigabitEthernet0/0/3]port link-type trunk 
[Huawei-GigabitEthernet0/0/4]port link-type trunk 
[Huawei-GigabitEthernet0/0/5]port link-type trunk 
	
[Huawei-port-group-1]port trunk allow-pass vlan 10
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10
[Huawei-GigabitEthernet0/0/2]port trunk allow-pass vlan 10
[Huawei-GigabitEthernet0/0/3]port trunk allow-pass vlan 10
[Huawei-GigabitEthernet0/0/4]port trunk allow-pass vlan 10
[Huawei-GigabitEthernet0/0/5]port trunk allow-pass vlan 10
[Huawei-port-group-1]quit
[Huawei]port-gr	
[Huawei]port-group 2		
[Huawei-port-group-2]group-member GigabitEthernet 0/0/6 to GigabitEthernet 0/0/1
0	
[Huawei-port-group-2]port link-type trunk 
[Huawei-GigabitEthernet0/0/6]port link-type trunk 
[Huawei-GigabitEthernet0/0/7]port link-type trunk 
[Huawei-GigabitEthernet0/0/8]port link-type trunk 
[Huawei-GigabitEthernet0/0/9]port link-type trunk 
[Huawei-GigabitEthernet0/0/10]port link-type trunk 
[Huawei-port-group-2]port trunk allow-pass vlan 20
[Huawei-GigabitEthernet0/0/6]port trunk allow-pass vlan 20
[Huawei-GigabitEthernet0/0/7]port trunk allow-pass vlan 20
[Huawei-GigabitEthernet0/0/8]port trunk allow-pass vlan 20
[Huawei-GigabitEthernet0/0/9]port trunk allow-pass vlan 20
[Huawei-GigabitEthernet0/0/10]port trunk allow-pass vlan 20
[Huawei-port-group-2]quit
[Huawei]port-group 3		
[Huawei-port-group-3]group-member GigabitEthernet 0/0/11 to GigabitEthernet 0/0/
15
[Huawei-port-group-3]port link-type trunk	
[Huawei-GigabitEthernet0/0/11]port link-type trunk 
[Huawei-GigabitEthernet0/0/12]port link-type trunk 
[Huawei-GigabitEthernet0/0/13]port link-type trunk 
[Huawei-GigabitEthernet0/0/14]port link-type trunk 
[Huawei-GigabitEthernet0/0/15]port link-type trunk 
[Huawei-port-group-3]port trunk allow-pass vlan 30
[Huawei-GigabitEthernet0/0/11]port trunk allow-pass vlan 30
[Huawei-GigabitEthernet0/0/12]port trunk allow-pass vlan 30
[Huawei-GigabitEthernet0/0/13]port trunk allow-pass vlan 30
[Huawei-GigabitEthernet0/0/14]port trunk allow-pass vlan 30
[Huawei-GigabitEthernet0/0/15]port trunk allow-pass vlan 30
[Huawei-port-group-3]quit
[Huawei]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50

    3.配置两台交换机连接端口

    [Huawei]interface GigabitEthernet 0/0/23
[Huawei-GigabitEthernet0/0/23]port link-type tr	
[Huawei-GigabitEthernet0/0/23]port link-type trunk 	
[Huawei-GigabitEthernet0/0/23]port trunk allow-pass vlan 10 20 30
[Huawei-GigabitEthernet0/0/23]


    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    [Huawei]interface GigabitEthernet 0/0/22
[Huawei-GigabitEthernet0/0/22]port link-type trunk all	
[Huawei-GigabitEthernet0/0/22]port trunk allow-pass vlan 10 20 30 
[Huawei-GigabitEthernet0/0/22]

    • 1
    • 2
    • 3
    • 4

    六、SW2和SW3配置

    1.SW2配置

    [Huawei]vlan batch 10 20 30 
[Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk 	
[Huawei-port-group-link-tr]port trunk allow-pass vlan 10 20 30
[Huawei-port-group-link-tr]
[Huawei]interface Ethernet0/0/2	
[Huawei-Ethernet0/0/2]port link-type access 
[Huawei-Ethernet0/0/2]port default vlan 10
[Huawei-Ethernet0/0/2]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9

    2.SW3配置

    [Huawei]vlan batch 10 20 30 
[Huawei]interface GigabitEthernet 0/0/1	
[Huawei-port-group-link-tr]port trunk allow-pass vlan 10 20 30
[Huawei-port-group-link-tr]
[Huawei]interface Ethernet0/0/2
[Huawei-Ethernet0/0/2]port link-type access 	
[Huawei-Ethernet0/0/2]port default vlan 10
[Huawei-Ethernet0/0/2]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8

    七、测试四台IP互通

    在这里插入图片描述

    在这里插入图片描述

    八、华为hyprid接口介绍

    1.华为hyprid介绍

    Hybrid特性是华为交换机的专有特性，该特性为局域网的搭建提供了更多的灵活性和安全性。

    2.华为三种端口区别

    1.Access类型端口：只能属于1个VLAN，一般用于连接计算机端口；
    2.Trunk类型端口：可以允许多个VLAN通过,可以接收和发送多个VLAN 报文,一般用于交换机与交换机相关的接口。
    3.Hybrid类型端口：可以允许多个VLAN通过，可以接收和发送多个VLAN 报文，可以用于交换机的间连接也可以用于连接用户计算机。

    3.hyprid模式配置SW2

    [Huawei]interface Ethernet0/0/1
[Huawei-Ethernet0/0/1]dis this
#
interface Ethernet0/0/1
#
return
[Huawei-Ethernet0/0/1]pori	
[Huawei-Ethernet0/0/1]port	
[Huawei-Ethernet0/0/1]port lin	
[Huawei-Ethernet0/0/1]port link-hy	
[Huawei-Ethernet0/0/1]port link-ty	
[Huawei-Ethernet0/0/1]port link-type h	
[Huawei-Ethernet0/0/1]port link-type hybrid 
[Huawei-Ethernet0/0/1]port h	
[Huawei-Ethernet0/0/1]port hybrid un	
[Huawei-Ethernet0/0/1]port hybrid untagged v	
[Huawei-Ethernet0/0/1]port hybrid untagged vlan 30
[Huawei-Ethernet0/0/1]port	
[Huawei-Ethernet0/0/1]port hy	
[Huawei-Ethernet0/0/1]port hybrid p	
[Huawei-Ethernet0/0/1]port hybrid pvid vlan 30
[Huawei-Ethernet0/0/1]quit

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22

    4.测试网络联通情况

    在这里插入图片描述

    九、使用hybrid配置trunk效果

    1.更换trunk为hybird模式

    [Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]dis this
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 10 20 30
#
return
[Huawei-GigabitEthernet0/0/1]undo port trunk allow-pass vlan 10 20 30 
[Huawei-GigabitEthernet0/0/1]port link-type hybrid 
[Huawei-GigabitEthernet0/0/1]port	l	
[Huawei-GigabitEthernet0/0/1]port hybrid tagged vlan 10 20 30 
[Huawei-GigabitEthernet0/0/1]dis this
#
interface GigabitEthernet0/0/1
 port hybrid tagged vlan 10 20 30
#
return
[Huawei-GigabitEthernet0/0/1]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19

    2.查看网络联通情况

    在这里插入图片描述

    3.查看本征vlan

    [Huawei]display port vlan
Port                    Link Type    PVID  Trunk VLAN List
-------------------------------------------------------------------------------
Ethernet0/0/1           hybrid       1     -                                   
Ethernet0/0/2           access       10    -                                   
Ethernet0/0/3           access       20    -                                   
Ethernet0/0/4           hybrid       1     -                                   
Ethernet0/0/5           hybrid       1     -                                   
Ethernet0/0/6           hybrid       1     -                                   
Ethernet0/0/7           hybrid       1     -                                   
Ethernet0/0/8           hybrid       1     -                                   
Ethernet0/0/9           hybrid       1     -                                   
Ethernet0/0/10          hybrid       1     -                                   
Ethernet0/0/11          hybrid       1     -                                   
Ethernet0/0/12          hybrid       1     -                                   
Ethernet0/0/13          hybrid       1     -                                   
Ethernet0/0/14          hybrid       1     -                                   
Ethernet0/0/15          hybrid       1     -                                   
Ethernet0/0/16          hybrid       1     -                                   
Ethernet0/0/17          hybrid       1     -                                   
Ethernet0/0/18          hybrid       1     -                                   
Ethernet0/0/19          hybrid       1     -                                   
Ethernet0/0/20          hybrid       1     -                                   
Ethernet0/0/21          hybrid       1     -                                   
Ethernet0/0/22          hybrid       1     -                                   
GigabitEthernet0/0/1    hybrid       1     10 20 30
GigabitEthernet0/0/2    trunk        1     1 10 20 30

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
  • 相关阅读:
    《国资报告》专访高煜光 | 国企数字化转型如何拥抱超自动化？
    学个Antenna：手机天线入门
    (C++ STL) 详解vector模拟实现
    【EMC专题】EMC测试——辐射发射测试方法
    【排序算法】插入排序
    Python接口自动化核心模块 - 数据库操作和日志
    SpringBoot 实现数据脱敏
    批量实现身份证识别(标签-安全|关键词-身份证识别)
    浅析拉格朗日乘数法及其对偶问题
    JSP智能小区物业管理系统
  • 原文地址：https://blog.csdn.net/jks212454/article/details/126413051