华为无线设备配置WMM和优先级映射

配置LSW和AC，使AP与AC之间能够传输CAPWAP报文
[LSW1]vlan batch 100
[LSW1-GigabitEthernet0/0/1]port link-type trunk
[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
[LSW1-GigabitEthernet0/0/2]port link-type trunk
[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
[LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 100
[AC1]vlan batch 100 101
[AC1-GigabitEthernet0/0/1]port link-type trunk
[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

配置AC与上层网络设备互通
[AC1-GigabitEthernet0/0/2]port link-type trunk
[AC1-GigabitEthernet0/0/2]port trunk allow-pass vlan 101

配置AC作为DHCP服务器，为STA和AP分配IP地址
[AC1]dhcp enable
[AC1-Vlanif100]ip add 10.1.100.1 24
[AC1-Vlanif100]dhcp select interface
[AC1-Vlanif100]int Vlanif 101
[AC1-Vlanif101]ip add 10.1.101.1 24
[AC1-Vlanif101]dhcp select interface

配置AP上线
[AC1-wlan-view]ap-group name ap-group1 //创建AP组
[AC1-wlan-view]regulatory-domain-profile name domain1 //创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板
[AC1-wlan-regulate-domain-domain1]country-code cn
[AC1-wlan-view]ap-group name ap-group1
[AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain1
[AC1]capwap source interface Vlanif 100 //配置AC的源接口
[AC1]wlan
[AC1-wlan-view]ap auth-mode mac-auth //在AC上离线导入AP，并将AP加入AP组
[AC1-wlan-view]ap-id 0 ap-mac 00e0-fc60-4940
[AC1-wlan-ap-0]ap-name ap1
[AC1-wlan-ap-0]ap-group ap-group1

配置WLAN业务参数
[AC1-wlan-view]security-profile name wlan-security //创建安全模板，并配置安全策略
[AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes
[AC1-wlan-view]ssid-profile name wlan-ssid //创建SSID模板，并配置SSID名称
[AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net
[AC1-wlan-view]vap-profile name wlan-vap //创建VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板
[AC1-wlan-vap-prof-wlan-vap]forward-mode tunnel
[AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-id 101
[AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security
[AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid
[AC1-wlan-view]ap-group name ap-group1 //配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板的配置
[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio all

配置AP射频的信道和功率
[AC1-wlan-view]rrm-profile name default //关闭射频的信道和功率自动调优功能
[AC1-wlan-rrm-prof-default]calibrate auto-channel-select disable
[AC1-wlan-rrm-prof-default]calibrate auto-txpower-select disable
[AC1-wlan-view]ap-id 0 //配置AP射频0的信道和功率
[AC1-wlan-ap-0]radio 0
[AC1-wlan-radio-0/0]channel 20mhz 6
[AC1-wlan-radio-0/0]eirp 127
[AC1-wlan-ap-0]radio 1 //配置AP射频1的信道和功率
[AC1-wlan-radio-0/1]channel 20mhz 149
[AC1-wlan-radio-0/1]eirp 127

配置WMM功能
[AC1-wlan-view]radio-2g-profile name wlan-radio2g //创建2G射频模板，并配置WMM功能使视频业务优先使用网络带宽
[AC1-wlan-radio-2g-prof-wlan-radio2g]wmm edca-ap ac-vo ecw ecwmin 3 ecwmax 4 txoplimit 94
[AC1-wlan-radio-2g-prof-wlan-radio2g]wmm edca-ap ac-vi ecw ecwmin 2 ecwmax 3 txoplimit 47
[AC1-wlan-view]ap-group name ap-group1 //在AP组中引用2G射频模板
[AC1-wlan-ap-group-ap-group1]radio-2g-profile wlan-radio2g radio all
[AC1-wlan-view]ssid-profile name wlan-ssid //进入SSID模板，并配置WMM功能使视频业务优先使用网络带宽
[AC1-wlan-ssid-prof-wlan-ssid]wmm edca-client ac-vo ecw ecwmin 3 ecwmax 4 txoplimit 94
[AC1-wlan-ssid-prof-wlan-ssid]wmm edca-client ac-vi ecw ecwmin 2 ecwmax 3 txoplimit 47

配置优先级映射关系
[AC1-wlan-view]traffic-profile name traffic //创建流量模板，并配置优先级映射关系
[AC1-wlan-traffic-prof-traffic]priority-map downstream trust dscp
downstream dscp 48 to 55 dot11e 4
[AC1-wlan-traffic-prof-traffic]priority-map downstream dscp 56 to 63 dot11e 5
[AC1-wlan-traffic-prof-traffic]priority-map downstream dscp 32 to 39 dot11e 6
[AC1-wlan-traffic-prof-traffic]priority-map downstream dscp 40 to 47 dot11e 7
[AC1-wlan-traffic-prof-traffic]priority-map tunnel-upstream trust dot11e
[AC1-wlan-traffic-prof-traffic]priority-map tunnel-upstream dot11e 6 dscp 32
[AC1-wlan-traffic-prof-traffic]priority-map tunnel-upstream dot11e 7 dscp 40
[AC1-wlan-traffic-prof-traffic]priority-map tunnel-upstream dot11e 4 dscp 48
[AC1-wlan-traffic-prof-traffic]priority-map tunnel-upstream dot11e 5 dscp 56
[AC1-wlan-view]vap-profile name wlan-vap //在VAP模板中绑定流量模板
[AC1-wlan-vap-prof-wlan-vap]traffic-profile traffic

验证配置